适用于SamScene3D出品的ZHHH机场（2.0.2版本）。
参考JEPPESEN的ZHHH航图制作（航图编号10-9B，生效时间2026年2月18日）。
一、请注意：
1、这与现实不完全相同，仅用于MSFS。
2、每次只能安装一个ZHHH的GSX配置文件，如需要安装该GSX配置文件，请先删除其他已有文件。
3、部分停机位置分别对重型机和中型机定义了不同的后推路线，请根据需求和个人喜好选择。
4、JEPPESEN航图中部分停机位置在地景中并没有制作出来，因此这些停机位置没有在GSX中配置功能，它们包括：
parking223A，gate331L，gate331R，gate332L，gate332R，parking102，parking120-121，parking136-137，parking506-511，parking532-537，parking601-603，parking610-615
5、地景中以下停机位的位置与航图不一致，GSX后推路线参考地景位置自定义：
parking101
6、以下停机位置在地景中有制作出来，但在JEPPESEN航图中并没有，这些停机位置也配置了GSX功能，它们包括：
parking128-129

二、GSX配置文件特点：
1、以下所有停机位置均配置了后推路线（部分停机位置仅定义了沿白线推出），包括：
T2：gate201-220，parking221-223，parking224
T3：gate301-331，gate332，gate333-361
parking101，parking103-119，parking126-132，parking501-505，parking512-517，parking519-523
2、以下停机位置配置有VDGS：
gate201-220，parking221-223，parking224，gate301-331，gate332，gate333-361，parking108-119，parking512-517，parking519-523
3、以下停机位置配置有人工停机引导员：
parking101，parking103-107，parking126-132，parking501-505
4、以下停机位置原地开车后直接滑出，因此没有在GSX中配置后推功能及后推路线：
parking501-505
5、以下停机位置自定义了旅客登机行走路线和自定义候机厅自由行走旅客：
gate201-220,gate301-327,gate336-362
6、所有停机位置的滑入路线均进行了修正，确保VDGS或人工停机引导员引导飞机前轮沿地面黄色线滑入。
7、清晰明了的后推方向描述，确保你不会推错方向。
8、对地面服务车辆摆放进行了位置自定义，确保不会出现车辆与建筑重叠的情况。

三、使用方法：
将zhhh-CFSO4590-SamSence3D.ini文件复制到C:\Users\username\AppData\Roaming\virtuali\GSX\MSFS目录即可。

++++________++++
Applicable to the ZHHH airport (Version 2.0.2) produced by SamScene3D.
Produced with reference to the JEPPESEN ZHHH aeronautical chart (Chart Number 10-9B, effective date feb 18, 2026).
I. Please Note:
1.This is not identical to reality and is for MSFS use only.
2.Only one GSX profile for ZHHH can be installed at a time. If you wish to install this GSX profile, please delete any other existing files first.
3.Different pushback routes are defined for heavy and medium aircraft at some parking positions. Please choose according to your needs and personal preference.
4.Some parking positions listed in the JEPPESEN charts are not modeled in the scenery. Therefore, these parking positions do not have GSX functionality configured. They include:
parking223A, gate331L, gate331R, gate332L, gate332R, parking102, parking120-121, parking136-137, parking506-511, parking532-537, parking601-603, parking610-615
5.The position of the following parking stand in the scenery is inconsistent with the aeronautical chart. The GSX pushback route is customized based on the scenery position:
parking101
6.The following parking positions are modeled in the scenery but are not listed in the JEPPESEN charts. These parking positions also have GSX functionality configured. They include:
parking128-129

II. GSX Profile Features:
1.Pushback routes are configured for all the following parking positions (some positions only have a pushback along the white line defined):
T2: gate201-220, parking221-223, parking224
T3: gate301-331, gate332, gate333-361
parking101, parking103-119, parking126-132, parking501-505, parking512-517, parking519-523
2.VDGS is configured for the following parking positions:
gate201-220, parking221-223, parking224, gate301-331, gate332, gate333-361, parking108-119, parking512-517, parking519-523
3.A manual marshaller is configured for the following parking positions:
parking101, parking103-107, parking126-132, parking501-505
4.Aircraft at the following parking positions can taxi out directly after engine start. Therefore, pushback functionality and routes are not configured in GSX:
parking501-505
5.Custom passenger boarding walk paths and custom free-walking passengers in the terminal are defined for the following parking positions:
gate201-220, gate301-327, gate336-362
6.The taxi-in routes for all parking positions have been corrected to ensure the aircraft's nose wheel follows the ground yellow line when guided by the VDGS or manual marshaller.
7.Clear and understandable pushback direction descriptions to ensure you push back correctly.
8.Customized placement of ground service vehicles to prevent overlap with buildings.

III. Installation Method:
Copy the zhhh-CFSO4590-SamSence3D.ini file to C:\Users\username\AppData\Roaming\virtuali\GSX\MSFS.