Flightsim.to
    VVNB - Noi Bai enhancement for BATC - Image 1

    Beschreibung

    Tested in MSFS2024 using BeyondATC, as seen in screenshots.

    This add-on includes improved/reworked taxiway routing for external traffic injection (BeyondATC, FSLTL, AIG,...) at Noi Bai International Airport (ICAO: VVNB). You should get this package if landing aircrafts disappears.

    The package is based on the "VVNB - Noi Bai International Airport - Ground Base Package" by Yoshino, and requires it for ground visual elements, link (again, just in case):

    https://flightsim.to/file/49704/noi-bai-international-airport-ground-base

    Locations of jetways are based on DominicDesignTeam Noi Bai (payware, not required). All screenshots were made with all 3 add-ons active in MSFS2024.

    Just extract the package into Community folder, and you're ready to go.

     

    For more realistic traffic, only active parkings and gates for normal operations in Apron 1 were included, i.e. Stands 11-29, 35-55, details:

    - Conditional: 12A-B, 17A-B, 18A-B, 23A-B, 24A-B, 28A-B, 35A-B, 36A-B, 54A-B, 55A-B

    - Cargo: 53, 54-55(A-B)

     

    Package built in MSFS2020.

    Feedbacks for more realistic operation will be greatly appreciated.

     

    Known issues/limitations:

    - (Minor issue, not overly significant visual) Runways don't have Yellow lighting in final 600m on each end as the default "Precision markings" for each Runway is required, these markings cannot be made invisible, and will result in overlapping visuals on the runway.

    - Gates 17B, 18B, 23B, and 24B doesn't have assigned jetway, i.e. Jetways will not work for these Gates during departure.

    Abhängigkeiten

    ErforderlichVVNB - Noi Bai International Airport - Ground Base PackageAnsehen

    Kommentare(22)

    Melden Sie sich an, um an der Diskussion teilzunehmen

    Anmelden
    H
    HippoMashaLeo

    3 months ago

    BATC never provides me with any taxi instruction to gate after landing. It's always pilot's discretion. Am I doing anything wrong?
    n
    ntnvAuthor

    3 months ago

    If traffic receives instructions but you don't, you need to stop your plane when handed to Ground (usually when you are crossing an exit's holdshort), request a Gate, then it should work. It's just how BATC works for now, the same goes for traffic: they stop on top of the first hold, switch to Ground, request Gate, then move again. This is because the gap between 2 holds of RW11L and RW11R are very short.
    l
    londesigma

    5 months ago

    hi the building dont show and are still the default in the sim. i have extracted and pasted into community folder. i have the dependant folder also in community and that one works as the taxi lines appeared once i added that.
    n
    ntnvAuthor

    5 months ago

    The buildings are from the payware VVNB by Dominic Design. If you don't need the buildings you don't have to buy the package.
    h
    holyhdwg

    6 months ago

    Hey does the dominicdesignteam scenery package work in msfs 2024?
    n
    ntnvAuthor

    6 months ago

    Yes, most sceneries do, don't worry.
    T
    TheStarz

    7 months ago

    Does this mean that the dominicdesignteam vvnb is compatible with msfs 2024?
    n
    ntnvAuthor

    7 months ago

    Yes, most sceneries are, don't worry.
    d
    dangkhoa7498

    9 months ago

    Thank you for your wonderful addon. But I have the problem that the Intl Airlines in BATC are currently distributed in Terminal 1 instead of Terminal 2. Could you check it ?
    n
    ntnvAuthor

    9 months ago

    Parking spots are assigned by BATC so there's not much I can do about that.
    d
    dangkhoa7498

    2 months ago

    And can I have one more question ? BATC usually gives me departure taxi instruction via V V2 S2 S and S1, but the std real-world taxi routes should be major on S, not in V. Could you consider to fix it. Thank you and appreciating!!!
    n
    ntnvAuthor

    2 months ago

    That's up to BATC to "fix", to be honest. I can only match the taxiway to real life, and the routing is determined by BATC.
    d
    dangkhoa7498

    2 months ago

    Oh now I got it, thank you for answer.
    j
    jackhoppkkins

    11 months ago

    thanks so much for this, please could you also do one for VVTS?
    B
    BattleOverlord

    about 1 year ago

    When running your mod and the moded airport batc spawns some aircraft wrongly

    n
    ntnvAuthor

    about 1 year ago

    That's most likely a BATC bug, you might want to send that to the devs, with logs, on their Discord. I've personally never had this issue, but some people have had this in other airports, as well.
    d
    dangkhoa7498

    about 1 year ago

    Does this addon propose pushback GSX profile for VVNB ground enhancement ? I am using VVNB from Yoshino but my aircraft only is push straight even with any option.
    n
    ntnvAuthor

    about 1 year ago

    I don't use GSX, but I think this one should not do anything much different from Yoshino's VVNB. Most improvements here are for AI traffic. You'd have to pushback manually, I guess.
    d
    dangkhoa7498

    about 1 year ago

    @ntnv thank you for your reply. One more question, do I need to set the priority order for this package over the Yoshino's one ?
    n
    ntnvAuthor

    about 1 year ago

    The package will automatically have the correct priority, no worries
    MSFS 2020MSFS 2024

    VVNB - Noi Bai enhancement for BATC

    This add-on enhances taxiway routing at Noi Bai International Airport (ICAO: VVNB), improving the experience for users of traffic injection tools like BeyondATC, FSLTL, and AIG. It requires the base ground package by Yoshino for essential visual elements. Notable features include designated locations for jetways and cargo stands, tested primarily in MSFS2024 with BeyondATC, built using MSFS2020.

    Downloads2K
    Version0.6
    Dateigröße19.24 KB
    VeröffentlichtVor 1 Jahr
    AktualisiertVor 9 Monaten
    ntnv

    Community-Ersteller

    32 Addons • 94 Follower

    Unterstützer

    UAL4life

    CA$70

    Location

    View on Google Maps ↗

    More Information

    Simulator
    MSFS2020/24
    KategorieMiscellaneous
    Sub-CategoryBeyondATC Profiles
    Bewertung0.0 (0)
    LandVN
    ICAOVVNB

    Versionsgeschichte

    As BATC EA now has "Better handling of overlapping/multiple aircraft seeking same spot": - Re-introduced conditional stands 17A-B, 18A-B, 23A-B, 24A-B, 35A-B,& 36A-B, - Changed stands 12, 28, 35(A-B), 36(A-B), and 52 from RAMP_CARGO to suitable RAMP_GA types.

    Ähnliche Addons

    EHAM - FlyTampa Schiphol enhancement for BATC

    EHAM - FlyTampa Schiphol enhancement for BATC

    This add-on enhances Amsterdam Schiphol Airport (EHAM) for Microsoft Flight Simulator 2024, specifically optimizing taxiway routing and runway logic for external traffic injection using BeyondATC. Key improvements include corrected taxiway designations, adjustments to gate configurations, and refined runway starts. Compatibility requires the FlyTampa Schiphol v1.2 scenery, with installation via the Community folder.

    von ntnv

    5.0
    CYYZ - FlyTampa Toronto enhancement for BATC

    CYYZ - FlyTampa Toronto enhancement for BATC

    This add-on enhances Toronto Pearson International Airport (CYYZ) with improvements for external traffic injection in Microsoft Flight Simulator 2024, specifically for use with BeyondATC and other tools. Key features include adjustments to runway hold shorts, reconnection of terminal taxiways, and enhancements to taxiway layouts and parking types. The package is designed for use alongside FlyTampa Toronto and is easily installed by placing it in the Community folder.

    von ntnv

    5.0
    VHHH - WFScenery Hong Kong enhancement for BATC

    VHHH - WFScenery Hong Kong enhancement for BATC

    The VHHH - WFScenery Hong Kong enhancement for BATC add-on provides a comprehensive fix for runway logic at Hong Kong International Airport, facilitating proper external traffic management with tools like BeyondATC, FSLTL, and AIG. Key updates include the addition of hold-short markings on high-speed exits, adjustments to gate routing, and improvements in runway entry logic. The package is designed for use in MSFS2024, building upon previous versions from MSFS2020, and requires the WF Scenery Studio Hong Kong International add-on for full functionality.

    von ntnv

    0.0
    LTFM - SceneryTR Istanbul enhancement for BATC

    LTFM - SceneryTR Istanbul enhancement for BATC

    This add-on enhances the scenery of Istanbul Airport (LTFM) for Microsoft Flight Simulator 2024, specifically for users of BeyondATC. It includes fixes for runway hold short positions, improves runway logic, and optimizes routing for external traffic injection systems such as FSLTL and AIG. Users should ensure they have the SceneryTR Istanbul package, as this add-on is designed to improve the realism of taxiway navigation and prevent runway incursions.

    von ntnv

    5.0