Flightsim.to
    LTFM - SceneryTR Istanbul enhancement for BATC - Image 1

    Beschreibung

    NOTE: I'd recommend using the freeware LTFM, instead, as I've advised Argaeus (1 of the 4 developers for this scenery) on BATC compatibility during the development of v2.0. More details in the pinned comment.

    Of course, if you'd prefer to have better looking Terminals and Buildings then the Payware is more suitable for your needs.

    Tested in MSFS2024 using BeyondATC, as seen in screenshots.

    This add-on includes runway hold short fix, runway logic fix, and taxi routing optimization for external traffic injection (BeyondATC, FSLTL, AIG,...) at Istanbul Aiport (ICAO: LTFM).

    Dependency: SceneryTR Istanbul Airport (SceneryTR; SimMarket; flightsim.to) (not sponsored)

    You should definitely get this addon for realistic holding positions on RW35L/17R and RW35R/17L, i.e. prevent unintended runway incursions.

    This is a MASSIVE airport, so please expect around 2-6 minutes of initial load time for BeyondATC.

    Just extract the ZIP into Community folder, and you're ready to go.

    Package built in MSFS2020.

    Feedbacks for corrections will be greatly appreciated.

    Specifics:

    - Reduced ~40% of taxiway nodes.

    - Fixed/adjusted most hold-shorts.

    - Added/improved routing and intersections.

    - Reworked runway taxi logic.

    - Adjusted runway starts.

    - Adjusted/Added taxiway names.

    - Re-aligned & resized parking stands.

    Abhängigkeiten

    ErforderlichLTFM - Istanbul AirportAnsehen EmpfohlenLTFM Airport ImprovementsAnsehen

    Location

    Hold Ctrl to interact with the map
    View on Google Maps ↗

    Kommentare(26)

    Melden Sie sich an, um an der Diskussion teilzunehmen

    Anmelden
    Angepinnter Kommentar
    n
    ntnvAuthor

    11 days ago

    I'd recommend using the freeware LTFM, instead: https://flightsim.to/addon/85031/ltfm-istanbul-airport-ver-1-9-50 (actually v2.0.23, but shows up as 1.9.55 on fs.to).
    And, don't forget the Aerial: https://flightsim.to/addon/112082/ltfm-istanbul-base-imagery
    This enhancement mod/"profile" would, of course, no longer be necessary.
    CaptainKaram

    7 days ago

    Great work overall, However, I noticed that wide-body aircraft consistently stop at the runway holding points for 35R/17L and 36/18, which can cause unnecessary congestion. Additionally, taxiways E1 and B never seem to be used, even when they would provide a more efficient routing
    n
    ntnvAuthor

    6 days ago

    These are all decided by BATC. I'm pretty sure that E1 and B are used all the time, now, though I've not tested BATC EA version.
    n
    ntnvAuthor

    11 days ago

    I'd recommend using the freeware LTFM, instead: https://flightsim.to/addon/85031/ltfm-istanbul-airport-ver-1-9-50 (actually v2.0.23, but shows up as 1.9.55 on fs.to).
    And, don't forget the Aerial: https://flightsim.to/addon/112082/ltfm-istanbul-base-imagery
    This enhancement mod/"profile" would, of course, no longer be necessary.
    n
    ntnvAuthor

    about 3 hours ago

    ILS GS fix: https://flightsim.to/addon/112890/ltfm-ils-gs-fix
    T
    Tenshoot

    17 days ago

    Thank you for this excellent fix! I’m using the SceneryTR LTFM scenery from the MSFS Marketplace in MSFS 2024 with BeyondATC, and the loading time has improved dramatically after installing this add-on. Taxi routing and hold-short positions also seem much more realistic. Highly recommended for anyone flying at LTFM with external traffic injection.
    n
    ntnvAuthor

    17 days ago

    Ah, thanks. Good to know it also works with Marketplace scenery.
    y
    younes1710

    about 1 month ago

    Hi nice work can you do the same with OEMA and OEJN airport please
    n
    ntnvAuthor

    about 1 month ago

    Thanks, unfortunately, I don't have those sceneries, nor do I plan to get them.
    b
    bladerunner

    8 months ago

    ILS 35R does not load automatically to FMC with this addon
    n
    ntnvAuthor

    8 months ago

    Does it work with the base package? I mostly fly aircrafts with their own Navigraph installations so I honestly never noticed.
    Probably, you should give it another try and let me know if you still have the issue.
    L
    Loud

    9 months ago

    Amazing work thank you so much ! May I request if it's possible to do OTHH by inibuilds and LEMD by latinvfr ? these airports are a bit of a mess with beyondatc and the current afcad.
    n
    ntnvAuthor

    9 months ago

    Unfortunately, I don't have the airports, and I also don't plan on getting them
    K
    K4iN

    9 months ago

    The add-on is very good; the planes stop in the correct places, unlike in the original. However, I don’t know why the traffic gets stuck for me at 35R and around the runway. Does anyone have a solution?
    n
    ntnvAuthor

    9 months ago

    This is a BATC bug, you can check report #18079313 for more details
    B
    BattleOverlord

    9 months ago

    Awesome addon. This airport can load up to 20 minutes with each one flight using BATC.
    N
    Nzx1

    9 months ago

    Must have!
    L
    Loay

    9 months ago

    Still BATC stuck at %10
    P
    Patfre91

    9 months ago

    Did you manage to get any resolution? I have the same issue.
    B
    BattleOverlord

    9 months ago

    This airport has a lot of errrors in the navdata which comes with this airport. Its developer fault unfortunately. What worked for me is using this mod (batc will load it faster). If you have batc error when loading flight plan with this airport I recommend not using STAR at the end but only last waypoint and then runway for example ARTIP LFTM/36R
    MSFS 2020MSFS 2024

    LTFM - SceneryTR Istanbul enhancement for BATC

    This add-on enhances the scenery of Istanbul Airport (LTFM) for Microsoft Flight Simulator 2024, specifically for users of BeyondATC. It includes fixes for runway hold short positions, improves runway logic, and optimizes routing for external traffic injection systems such as FSLTL and AIG. Users should ensure they have the SceneryTR Istanbul package, as this add-on is designed to improve the realism of taxiway navigation and prevent runway incursions.

    Downloads3K
    Version0.3.1
    Dateigröße110.2 KB
    VeröffentlichtVor 1 Jahr
    AktualisiertVor 2 Wochen
    ntnv

    Community-Ersteller

    33 Addons • 96 Follower

    Nutzerbewertungen

    4.9

    8 Bewertungen

    5
    88%
    4
    13%
    3
    0%
    2
    0%
    1
    0%

    More Information

    Simulator
    MSFS2020/24
    KategorieMiscellaneous
    Sub-CategoryBeyondATC Profiles
    LandTurkey
    ICAOLTFM

    Versionsgeschichte

    Minor update: - Corrected Cargo stands naming (Stands H & K).

    Ähnliche Addons

    EHAM - FlyTampa Schiphol enhancement for BATC

    EHAM - FlyTampa Schiphol enhancement for BATC

    This add-on enhances Amsterdam Schiphol Airport (EHAM) for Microsoft Flight Simulator 2024, specifically optimizing taxiway routing and runway logic for external traffic injection using BeyondATC. Key improvements include corrected taxiway designations, adjustments to gate configurations, and refined runway starts. Compatibility requires the FlyTampa Schiphol v1.2 scenery, with installation via the Community folder.

    von ntnv

    5.0
    CYYZ - FlyTampa Toronto enhancement for BATC

    CYYZ - FlyTampa Toronto enhancement for BATC

    This add-on enhances Toronto Pearson International Airport (CYYZ) with improvements for external traffic injection in Microsoft Flight Simulator 2024, specifically for use with BeyondATC and other tools. Key features include adjustments to runway hold shorts, reconnection of terminal taxiways, and enhancements to taxiway layouts and parking types. The package is designed for use alongside FlyTampa Toronto and is easily installed by placing it in the Community folder.

    von ntnv

    5.0
    VHHH - WFScenery Hong Kong enhancement for BATC

    VHHH - WFScenery Hong Kong enhancement for BATC

    The VHHH - WFScenery Hong Kong enhancement for BATC add-on provides a comprehensive fix for runway logic at Hong Kong International Airport, facilitating proper external traffic management with tools like BeyondATC, FSLTL, and AIG. Key updates include the addition of hold-short markings on high-speed exits, adjustments to gate routing, and improvements in runway entry logic. The package is designed for use in MSFS2024, building upon previous versions from MSFS2020, and requires the WF Scenery Studio Hong Kong International add-on for full functionality.

    von ntnv

    0.0
    RKSI - LeAero Incheon enhancement for BATC

    RKSI - LeAero Incheon enhancement for BATC

    This add-on enhances Incheon International Airport (RKSI) in Microsoft Flight Simulator by integrating improved taxiway names, adjusted runway logic, and optimized parking for external traffic management systems like BeyondATC, FSLTL, and AIG. Additionally, it addresses vital operational aspects, such as realistic holding positions to help prevent runway incursions. The package requires the Le Aero Design Incheon International Airport scenery for optimal functionality.

    von ntnv

    0.0