NOTE: MSFS 2024 is supported as of MobiFlight BETA 10.4.0.1 and there is no need to update this profile to make it work. Just opt into the Beta in Mobiflight Settings and you'll get an update upon starting. The profile will work out of the box.

NOTE: If you are having issues with using any of the included EFIS profiles, please do not report them here in the comments but join the MobiFlight discord and open a thread there. I can't provide ANY support with EFIS since I don't own them, but you can reach the people who do on the discord server. Thank you!

Note: Firmware updates could break compatibility any time, so before updating make sure the new firmware is already supported.
As of MobiFlight 10.4 the following firmware versions are tested/supported:
FCU 1.09, 1.13 and 1.16
EFIS L 0.97
EFIS R 0.99

This is a set of MobiFlight profiles for the WINWING FCU and EFIS L/R to be working with the Fenixsim/Fenix A319/A320/A321 aircraft.

Usage:

• Download this profile and unzip the contained .mcc file somewhere permanent (choose the correct one based on the units you own)
• Download MobiFlight version 10.4 or higher from the official https://www.mobiflight.com website
• Install the software and run it
• Then go to File -> Open and select the .mcc file you unzipped earlier
• A dialog will show up to assign "orphaned serial" (see animated GIF at the top):
  • Select at the top the "orphaned serial"
  • Select in the dropdown below your WinWing FCU
  • Click "Assign", then "OK"
• Press "Save" in the toolbar to avoid having to do the serial assignment again
• Enable "Auto Run" in the toolbar at the top (turns on the light bulb) to make sure MobiFlight starts working as soon as MSFS is running
  • Alternatively manually press "Run" as soon as MSFS is running to start operation
• Add MobiFlight to Windows Autostart or run it manually (can be started after MSFS is loaded too)
• If you have multiple profiles for different aircraft:
  • Load into the Aircraft and select the correct Profile by using File -> Open and opening the correct .mcc
  • In the statusbar of MobiFlight click on the aircraft type/livery shown and select "Link current config"
  • Whenever you load into this livery/aircraft, the profile will be loaded automatically
  • Repeat this process for every aircraft AND livery since the link is set for each livery

Important:

• If you received your FCU/EFIS and did not yet check for Firmware updates, do so by installing the SimApp Pro and check the firmware there. Afterwards you can uninstall SimApp Pro or turn off AutoStart in it's settings to avoid conflicts.
• Some knobs in the virtual cockpit are not moving because triggering the animation would cause a very laggy and unresponsive behavior, so for the time being there is no solution to visually turn the knobs in the cockpit. Button presses and Knob push/pull are animated though.

For questions and support visit:
MobiFlight Discord: https://discord.gg/QjCQXSQs5K
MobiFlight Website: https://www.mobiflight.com