DA62X Improvement Mod

Kompatibilität mit Sim Update 6 bestätigt worden ist.

Mehr lesen

Version v0.5.0.2
Erstveröffentlichung November 02, 2020
Zuletzt aktualisiert September 26, 2021
Dateigröße 287.97 MB
Downloads 72,585
Status Noch nicht heruntergeladen
Diese Datei wurde auf Viren gescannt und ist sicher zum Download.
Aircraft Enhancements
#Real-Life Exclusive Drag and Drop


36,870 | XIII General

Basierend auf 100 Bewertungen

Es ist unter keinen Umständen erlaubt, diese Datei auf andere Seiten hochzuladen.

Sie dürfen meine Datei ohne Genehmigung oder Credits verändern oder verbessern.

Sie dürfen meine Datei konvertieren, aber Sie müssen mich ordnungsgemäß nennen und einen Link zu meiner Datei hinzufügen.

Sie dürfen Assets aus meiner Datei ohne Erlaubnis oder Credits verwenden.

Diese Artikel befinden sich derzeit auf der Liste und werden in Kürze bearbeitet!
Vorschläge, Bugs und Ideen für die Zukunft.

  • Version v0.5.0.2 September 26, 2021

    Fix for WT G1000NXi
    Note: Naming and order of System and Fuel page is not correct.
    Not using NXi fuel totaliser at this moment.

    Old panel.xml is still provided for those who still want to use the WT G1000 mod

  • Version v0.5.0.1 September 04, 2021

    Fixed the low engine power bug
    No longer to be fully shut down to change the deice fluid level. You just need to be on the ground

  • Version v0.5 September 03, 2021

    If you are having problems with Career plugins, check the PDF for instructions.

    Fix for NXi 0.5
    Deice fluid weight has been added (check PDF)
    NXi users can see the fluid level below the aux tanks
    Aux pumps turn off and on automatically when tanks are full or empty
    selecting unlimited fuel kills endurance and range calculations and deice fluid

    Fuel flow is more accurate at higher power settings
    Engine indications not as smooth, more closely represents the real thing.
    Fuel slosh has been added
    Engine failures based off temperature, not time
    Engines will catch fire

    Added particle effects
    Reduced landing gear clipping and fixed damage speeds
    stall behaviour softened

  • Version v0.4.5.1 August 16, 2021

    Copilot should be working again, thanks mugz <3
    "Prop Axis" CAS message only shows when the master is on.

  • Version v0.4.5 August 08, 2021

    Id like to thank asobo for breaking and having me to fix the following:
    Windshield defrost (for now its always on)
    Alternate deice switch: was inverted
    Prop governor: wont overshoot as much anymore
    ECU voters: click spots were inverted

    Partially redone electrical system:
    Fuel pumps, starters and Electric master behave 99% correctly.
    Reduced electrical load on most components.
    The text of respective indications will now change colour (systems and fuel page)
    Turning on master triggers fuel pump sound (using transfer pump sound as its not as annoying)
    Autopilot kinda sharpened a little
    Alternators and fuel valves are on when starting from cold and dark

    ECU test behaviour improved. ECU test reacts to the engine and the way its performing in the current conditions
    Slight asymmetries added in between left and right ECU test
    Slight spool up added when starting engines.
    Hot idle oil pressure not as low

    Debugging stuff:
    Added a full CAS message. I encourage you to read it if you see it...
    Added "PROP AXIS" CAS message. again, read it, please...
    Engines will shutoff when the FADEC is not running.

  • Version v0.4.2.1 July 31, 2021

    SU5 Hotfix,
    Fixed fuel guards, ELT.
    Made Load and RPM gauges a little smaller for the aux tank indications

    Showing copilot: At first it didnt work for me, the copilot wasnt shown in the external view either. Toggling through the pilots in the settings fixed it for me.

Häufig Gefragt

Fragen? Finden Sie hier Ihre Lösung.

"FADEC INOP" CAS message, Engines turning off

FADEC Code hasn’t loaded in. The FADEC is based on Simconnect and other simconnect mods can interfere with the FADEC. 

Additionally a livery with a seperate Panel.cfg (Xbox 01 livery for example) can stop the FADEC from being loaded in.


Check your other mods (Kenetic assist, replay mods, multiplayer mods, Liveries, etc). Try the default livery

"Incompatible Livery" CAS message and alot of other warnings.

The ModelBehaviorDefs folder isn’t being loaded in. Another mod (possibly livery) is interfering with the DA62X.

Check your community folder for other mods that might interfere with the DA62.

Try the default livery

"PROP AXIS" CAS message blinking on and off constantly

Most Joysticks will constantly send inputs to the game eventhough they are not moving. This normally happens inbetween 2 steps. This is perfectly normal behavior.


Moving your assigned propeller lever/wheel/slider to an end stop (0% or 100%) should fix it. If not, unassign/unbind the axis.

Controlling the DA62X seems sluggish, slow and heavy.

We all know how sensitive the planes are in this game. Check if you have sensitivity curve setup in your control settings. The DA62X doesn’t need a curve and it is recommended that you fly with a linear curve.

Unable to takeoff and or the plane rolls and flips uncontrollably

Only the modern flightmodel is supported.

Check that you are not using the legacy flightmodel.

Cockpit is invisible

Uwajimayas Lighting mod and MixMugs Pilot/Copilot mods are already integrated into the DA62X and are not needed. 


Remove those mods

MFD and PFD are swapped

Check if you are using any liveries or cockpit repaints or Uwajimayas lighting mod.

Can't start the engines, screens flash when pressing the starter

It could be that another mod or livery with it's own "systems.cfg" is interfering with the DA62X. 

Check your community folder for other mods that might interfere with the DA62X.

Remove Uwa's lighting mod if installed. 

Try the default livery


Diese Benutzer haben gespendet an mrtommymxr damit er weiterhin fantastische Add-ons für jedermann herstellen kann.


These add-ons may be required or recommended to use.

Ziemlich leer hier drüben.

576 Kommentare

Currently the NXi is locked to “Lean” and “System” pages, where it should be “System” and “Fuel” for the diamonds. I am obviously aware of this. Whenever it’s possible to change this, it will be done. Fuel totaliser from them will also be used later

While you are here, could you please upvote this bug and raise awareness.

Thank you


Your great mod is working fine with SU6, but there is a very small issue. The DE-ICE fluid gauge is now outside the layout with NXI 0.8.0. I guess the working title guys have changed some stuff in the engine parameters.

Engine Load% is always showing 100%. If I remove the DA62X mod the Load% functions normally.

Please remove de-ice fluid from payload. When we use any third-party software like OnAir company which controls payload&fuel it cause problems when Total Payload number is reduced during the flight in iciing condition. Thank you.

This is now my favourite mod. Absolute amazing work !

Having to monitor the temperatures for oil and coolant, so that they dont get too hot (which can happen with full throttle and Vy 90 Knots climb for too long for example) or that the engine wont start in extreme cold condition because of too cold fuel temperature or that engine can go off if the fuel gets too (extremely) cold... all of this adds so much to the immersion of the game, especially in VR. There´s now always something to monitor and adjust, really nice work !

2 questions:

1.) I experienced a slightly strange behaviour @ 25.000 feet in which full 100% throttle gave me something like 58% power and 2300 rpm, but lowering the throttle to something like like 95% gave me suddenly an increase in power = 60% and 2100 rpm, lowering the throttle more led to expected less power and rpm.

Is this a normal behaviour ?

2.) Would it somehow be possible to include somewhere in the plane (maybe on the G1000) an inside temperature display ? I thought as now in this mod it is possible to slightly heat up the windshield with the heated cockpit air, maybe we could get something like that. The DA62X is the perfect plane for cold environment flights, it would be wonderful for even more immersion to have to monitor the inside temperature to not freeze :=)


Just installed this mod on the most recent version of msfs, only problem I have is that the rudder seems unresponsive (If i check in flight control settings I can see that the input works, however nothing is moving in the aircraft)

What do?

Great changes as always, keep up the awesome work (somebody has to do it, since Asobo won't).

I was wondering if you could return the default states of the toggles to dark&cold (fuel selectors, alternators), starting the plane feels almost like it was pre-started for me lol

Why does the manifest.json file of the last two updates not show the version number?

Engines are not starting for me on last version.

It strange that the [B] key that's set for Barometer now turns the ELEC MASTER switch off, and in my settings the [A] is set for autopilot but now it turns the Alternators on/off ... I've installed the previous version of this mod then above works as before.

This is somewhat off topic question/comment but is related to the DA62. I installed the MSFS SDK, which comes with a DA62 sample aircraft, and since doing that the in game DA62 has lost all its power (w or w/o this Mod). I did not create a project with the DA62 sample, and therefore, certainly did not (to my knowledge) install it in the game!! But it seems to be the only aircraft I've had a problem with after the SDK installation.

Any news on "always 100% engine load" after NXi 0.7.0? Asobo DA62 runs normally with NXi 0.7.0. Problem seems to be with DA62X? Thank you.

It looks like the engine load % always displays 100% regardless of the throttle setting with the 0.7.0 release of the WT G1000 NXi. Otherwise really enjoy this mod.

For me the lights are also floating in front of their positions, for landing and strobes. The landing light is even visible in the first product image here.

Looks like todays G1000nxi update broke the engine part of the MFD a bit. The top indicator says "Load %" and always stays at 100%. The AUX fuel level shows 19/19 even though I have 7.4/7.4 loaded.

This is just an observation. It may very well be the WorkingTitle folks that need to fix it and not a mod issue. I don't know.

And to be clear this was fine yesterday prior to updating G1000nxi.

There is a problem when pushing the stick hard forward the plane engine drops power

I love this plane but I can't start the left engine, the screen flashes when I click on the LH starter ?! i have the G1000 G3000 and pmsgtn750, no livery or other mods!


I just got a FFB yoke and trying to set it up as best as possible for this aircraft which I have never flown in real life, so it will be just guess work : (

Can somebody tell me if the DA62 elevator, aileron and rudder are affected by prop wash ?

This is not a yoke peripheral related question:

I am trying to simulate the loss of one engine.

Does this airplane in real life while in flight with one engine completely turned off, has its prop completely at a stop (not rotating), or is it still rotating?

Thanks for any answers

great mod! especially love the switches for the pilot avatars...

keep up the good work 😊

dont works. my throttle do nothing and my engines cant start...

I used to fly without this mod. Now I can't imagine not having it. Good Job. Thank You 😉

© mrtommymxr - All rights reserved. Jeglicher Re-Upload oder Weitervertrieb dieser Datei ohne vorherige schriftliche Zustimmung des Autors ist untersagt.
Diese Flight Simulator 2020 Mod wurde erstellt von mrtommymxr and shared in Aircraft » Aircraft Enhancements für Microsoft Flight Simulator.

Dedicated Link Verbessere Melden