Another release supported and created by the AIG community. This mod aims to significantly improve and increase the AI operations at FlyTampa's Sydney YSSY. You will see a significant increase in AI aircraft spawning and opened gates. The original airport is required. 

The original FlyTampa YSSY paware airport is required.

Features

• Updated airline coding sampled early-mid August 2024.
• Fixed ground routes, specifically:
  
  • Taxi routes where aircraft would take the longer route
  • Taxi routes where aircraft would taxi onto the runway only to exit the next high speed (Atributted with sharp taxi link angles)
• Fully optimized airline-specific coding:
  
  • Accurate domestic coding to specific gates including specific gates for smaller carriers such as Virgin Australia Regional, REX, and Air Work
  • Accurate use of domestic terminal sorting between Qantas, Qantas Link, Virgin Australia, Jetstar, and REX. 
  • International terminal gates are coded to specific operators such as ANA on gate 54, China Airlines on 30, and United on 51,53,54.
  • Cargo apron uses real historical data as other gates. Spot 4A is Coded as gate medium as it is used by Beijing Capital, China Eastern and other passenger carriers at times
• Complete overhaul of gate radius and changed all parking to appropriate types
• Preserved wingspans on some gates for user aircraft, 747 is supported (up to 36m wingspans).
• Preservation of original scenery files. No modifications or replacements are required to the scenery. This will work with all future updates to the scenery as well.
• This modification utilizes the resized wingspan due to the Asobo bug that encircles a 6m bubble between each parking spot.
• Full AIG support and compatibility.

 Installation

Drag and drop "z-yssy-kingsford-smith-intl" into the community folder.

Drag and drop "aig-aitraffic-oci-beta" to the installation location of AIG AIM (Usually the community folder). You will know you are doing it right if it asks to replace files.

Alternatively in AIG AI Manager, select settings, AIGAIM-OCI, "Use reduced wingspan", verify setup then save. Example here.

FSLTL Notes

FSLTL users must ensure the following for "wing_span" value on the "flight_model" configuration due to the 6/12m bug in fs2020:

"72" for A320 and 737 family
"52" for CRJ/ERJ regional jets
"164" for heavy jets (777, 787, A330, A350 etc)
"223" for A380s
"131" for 767s, A300s, and 757s
No further support for FSLTL is provided since I do not use FSLTL