Flightsim.to
    Inibuilds a300-600 Nose gear "down look" compression mod (PFD level with horizon fix) - Image 1

    Beschreibung

    This mod was created at the hopes this will be included in an update for the Inibuilds a300-600, (if not then do give my mod a try if you agree with my points)

    The IRL a300 (both B4-200 and -600 variants) has a nose down look, a short nose gear which is very compressed on ground, this is to compensate with the nose up on speeding down the runway. However I have noticed that for some time, the nose gear that inibuilds have done does not include this feature and is rather decompressed slightly when at rest on the ground, even with full load. My original assumption was modeling or animation howveer found upon close inspection it is not. I did remember one thing, I am very good with gear compression work and modifying the values of the contact points going back to the days of FS2004, FSX/P3D days. I am also responsible for the gear compression of an up and coming airbus product for microsoft flight simulator (not inibuilds). So if that doesn't say anything about this mod then I don't know what will. 

    The installation process is rather simple but also a bit tedious for those who would like to revert back. In the download of this file is a folder structure that is made in such a way that a drag and drop is all that is nessecary, however if you would like to revert at any point back to the original files, do look for them in the same folder structure and make coppies of them before installing this mod. Simple installation, drag and drop the Inibuilds-aircraft-a300-600 folder into your community folder and replace the files. ( this mod modifies the nose gear compression for the GE and PW pax and Freighter, AKA all variants )

    Next thing to do is enjoy!

    If at any point Inibuilds would like to test and use this in their future updates of this aircraft, do feel free to do so with credits please, I have spent quite a bit of time having to reload and load into the sim a few times and testing different weights and I also made sure to solve the issue 100% tested of the bouncing on certain weights and brake pressure applied at different speeds. From my rigorous testing, this does not exist.

    Kommentare(14)

    Melden Sie sich an, um an der Diskussion teilzunehmen

    Anmelden
    N
    NavyKing1992

    5 months ago

    Hi, could you do it for the Msfs 2024 PREMIUM A300 freighter as well?
    This one does not work in 2024 for the PREMIUM A300.
    The following would be great:
    -nose gear (compression more down)
    -slightly raise the main gear
    -modification of wing flex

    Thanks,
    Chrisd
    T
    TRSMatthew25

    7 months ago

    Could you please make this compatible with the 2024 version? Thanks
    Y
    Yourakk

    over 1 year ago

    I like the attention to details that this mod brings thanks !
    I took a ride to compare this mod with the UPS A300 picture you used. The nose down attitude is still not as much as the real one. If you look at the Honeywell PFD picture provided by Chris85flyCessna, pixel per pixel, the pitch attitude is -1.1 degree instead of -0.6. Will doubling the angle really change the look ?

    Oh and one more thing regarding the front landing gear ! Many people reported the yaw axis being too sensitive/twitchy at high speed. To my surprise I found that iniBuilds kept the steering angle of 65 degrees up to 178kts which is obviously unrealistic. I dialed down the value and the issue was gone. It is weird iniBuilds did not see this easy fix.
    R
    Roger2611

    over 1 year ago

    Thank you for your work! Love the attention to detail. Does it work with the 2024 version?
    A
    AATSAuthor

    over 1 year ago

    not yet tried this, likely not, but do let me know if it does. I have not have a chance to give 2024 a shot yet until it is stable and more widely used.
    C
    Chris85flyCessna

    almost 2 years ago

    Can you Please lift the main landing gear a bit more ? https://aerospace.honeywell.com/us/en/about-us/blogs/honeywell-engineers-help-airbus-300-freighters-fly-into-the-future
    https://airlinercafe.com/walkaround/airbus-a300-600f-walkaround/

    The AOA on ground (empty) must be -0,6 degreese nose forward
    A
    AATSAuthor

    over 1 year ago

    Should be done now, new drag and drop support now implemented and slightly raised main gear and slightly modified wing flex to better match the real one that isn't drooping as much as it does in sim on the ground. Enjoy :)
    N
    NavyKing1992

    almost 2 years ago

    Thank you for the update. Looks better now.
    j
    johnairbusa320

    almost 2 years ago

    Very nice add on..Can you make the "nose down gear for lvfr a321neo with horizon mod???I think it's too tall and not real....
    C
    Chris85flyCessna

    almost 2 years ago

    Thank you so much !

    Best regards
    e
    ebsoc

    almost 2 years ago

    Works great! Just flew the PW Pax variant, no bouncing or other issues. Many thanks for creating this!
    N
    NavyKing1992

    almost 2 years ago

    I did one flight so far, it seems to work (no bouncing) but unfortunately the front wheels are too deep in the ground right now, it´s not that much but you can see it. Maybe you can take a look at it. Anyway, thank you for the mod since inibuilds are not going to update this...https://forum.inibuilds.com/topic/22201-nose-down-look/?do=findComment&comment=54089
    A
    AATSAuthor

    almost 2 years ago

    I did see this and in my version I solved that issue. at least on my end it appears to be correct and not sinking in the ground as shown in the photos on that forum, I made it such that the tire sits on the ground but with maybe (if were talking cm) a few cm in the ground as to make it so the tire looks like its got air and not a solid object. if you used my values, do send some screenshots in dm and ill have a look and compare to my side what the issue is.
    N
    NavyKing1992

    almost 2 years ago

    I did one flight so far, it seems to work (no bouncing) but unfortunately the front wheels are too deep in the ground right now, it´s not that much but you can see it. Maybe you can take a look at it. Anyway, thank you for the mod since inibuilds are not going to update this...https://forum.inibuilds.com/topic/22201-nose-down-look/?do=findComment&comment=54089
    MSFS 2020MSFS 2024

    Inibuilds a300-600 Nose gear "down look" compression mod (PFD level with horizon fix)

    This add-on addresses the nose gear compression of the Inibuilds A300-600, replicating the real-life nose-down stance of the aircraft when on the ground. It modifies the contact points to achieve a more accurate visual representation of the nose gear, ensuring proper appearance and functionality across all variants. The installation is straightforward, involving a drag-and-drop process into the community folder, with options for users to revert to the original files if needed. Extensive testing has confirmed the mod eliminates bouncing issues associated with weight and braking.

    Downloads1K
    Version1.2
    Dateigröße21.23 KB
    VeröffentlichtVor 1 Jahr
    AktualisiertVor 1 Jahr
    AATS

    Community-Ersteller

    27 Addons • 61 Follower

    Nutzerbewertungen

    5.0

    4 Bewertungen

    5
    100%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    More Information

    Simulator
    MSFS2020
    KategorieAircraft Enhancements
    Sub-CategoryImprovement Mods
    Zugehörigkeit
    iniBuilds Airbus A300

    Versionsgeschichte

    After some re-work and multiple testing, I have raised the main gear slightly as well. This should look like a more authentic look of the A300-600. This update is now a drag and drop without the need of any file modifications. This file also modifies the wing flex of the A300 as well as on the ground the A300 wings do not droop down as much as it has been made to be in sim. The IRL aircraft wing flex is more flat on the ground and not so significant in the air either to my research. This should be a more authentic flight model now.

    Ähnliche Addons

    Buffalo Airways C-GWIR DC-3 With included cockpit textures and airspeed knots gauge GPS/Classic

    Buffalo Airways C-GWIR DC-3 With included cockpit textures and airspeed knots gauge GPS/Classic

    C-GWIR DC3 Buffalo Airways with Retrofit cockpit and custom IRL cockpit textures and Knots gauge instead of M.P.H which knots is being currently used. Also better for VATSIM use. This also includes better metalic PBR. The knots gauge has been tested and functions correctly and gives out the correct Knots reading.

    von AATS - AdamsAppleTechSupport & Vanfipe ( Fuselage and tail fin with permission to use by Vanfipe )

    4.6
    iFly 737 MAX8 Singapore Airlines 9V-MBH with cabin.

    iFly 737 MAX8 Singapore Airlines 9V-MBH with cabin.

    This add-on features a detailed rendition of the Singapore Airlines 737 MAX8, specifically the 9V-MBH model, designed for use with the iFly 737 MAX8. Included in the package is a fully developed cabin, enhancing the immersion for virtual pilots. The aircraft is used by Singapore Airlines for various short to medium-haul routes, offering a versatile flying experience from Malaysia to South Korea. Note that this version does not include a profile for the iFly 737, but future updates may address this feature.

    von AATS

    5.0
    Buffalo Airways C-GPNR DC-3 With IRL cockpit textures and IRL airspeed knot gauge instead of M.P.H

    Buffalo Airways C-GPNR DC-3 With IRL cockpit textures and IRL airspeed knot gauge instead of M.P.H

    C-GPNR one of Buffalo Airways DC3 originally a C47 converted for passenger use and is used often on a flight called the sked between Yellowknife and Hayriver and many other passenger routes operated by Buffalo airways. This livery is currently in Pax GPS config however will include a non GPS Pax variant when I have more time away from college. Otherwise enjoy this beautiful bird with 99% accuracy and custom PBR and custom cockpit textures to match the IRL aircraft as close as possible. 

    von AATS - AdamsAppleTechSupport & Canuckshaw - ( fuselage and tail fin by Canuckshaw however modified correctly by AATS - AdamsAppleTechSupport )

    5.0
    Buffalo Airways C-GWZS DC-3 With included IRL cockpit textures and IRL airspeed knots gauge

    Buffalo Airways C-GWZS DC-3 With included IRL cockpit textures and IRL airspeed knots gauge

    C-GWZS DC-3 Owned by Buffalo Airways as Passanger configuration, this aircraft was flown by the lead singer of Iron Maden. This includes is a cockpit texture set that accurately represents the IRL aircraft from images available. This includes is a cockpit texture set that accurately represents the IRL aircraft from images available.

    von AATS - AdamsAppleTechSupport

    5.0