Beschreibung
Hi there,
this is a GSX profile for Perfectsofts GMMX Marrakesh Menara airport.
EDIT: use this profile with the latest version (1.2 or higher) of this airport. Else GSX isn't working.
- Ramps 1 to 11 have passenger walkways. All other ramps are with bus transfer
- Ramp 1 with bus transfer when boarding
- I opened up and customized the E parkings to make them fit the 737 and A320.
- I did the same with all J gates (with jetways), but J gates only!!
- A gates are still for smaller planes. (not customized)
If you spawn at one of the positions, use GSX to reposition your aircraft first ('reposition at current gate').
Happy Flying.
Kommentare(15)
Melden Sie sich an, um an der Diskussion teilzunehmen
Anmeldenover 2 years ago
over 2 years ago
almost 3 years ago
almost 3 years ago
this is in all the gates even in the runway to repositionated the airplane
about 3 years ago
Lo compre en marketplace, esta actualizado?
about 3 years ago
Bonjour la version ne fonctionne plus avec la mise a jours SU12
over 3 years ago
Amazing work! Thank you.
over 3 years ago
What do you mean by "if you use the newer non - cache version of gsx you will have issues" Because I had this working but now it tells me afcad is invalid again
over 3 years ago
You have to use the 'old' cache setting of GSX and use the bgl file for GSX (as described above). If GSX is set to not cache (read the bgls on the fly) it will use the original bgl from Perfectsoft.
over 3 years ago
How do I set it to not cache on the fly to read your BGL?
over 3 years ago
You have to set it TO CACHE (not not cache). To do so, open the FSDT Installer and click config for GSX and UNCHECK the "Use SU10 Navdata API" option. (see also GSX manual page 84 for that).
over 3 years ago
not possible, I use the SU10 for many airports and cant uncheck that. And to make it less confusing, just say "the SU10 Navdata setting"
over 3 years ago
Fantastic Job. I appreciate the effort you put into this, as the airport is beautiful and sad that the developer is not evolved enough to care.
over 3 years ago
Thanks for the hard work ! Was looking for a profile for a long long time ! :D
Will test it ASAP and give a rate !
GMMX Marrakesh (Perfectsoft) - GSX Profile
This is a GSX profile for Perfectsofts GMMX Marrakesh Menara airport. Use this profile with the latest version (1.2) of this airport. Else GSX isn't working. If you spawn at one of the positions, use GSX to reposition your aircraft first ('reposition at current gate').
Nutzerbewertungen
3 Bewertungen
More Information
Versionsgeschichte
- removed wingwalkers on all positions - added engine start distance on all pushbacks
Ähnliche Addons
EPGD Gdansk (Drzewiecki) - GSX Profile
Enhance the ground handling experience at EPGD Gdańsk Lech Wałęsa Airport with this modified GSX profile for Microsoft Flight Simulator by Drzewiecki Design. This profile replaces stairs with jetways at gates, while maintaining passenger walkways within the scenerys building limits. Easily differentiate it with full yellow ground handling on gates. Happy flying!
von Watsi
GMMN Casablanca (Prealsoft) - GSX Profile
This is a GSX profile for Prealsofts GMMN Casablanca airport. Short notice: the original scenery from Prealsoft does not provide all positions/stands of the real airport. All available gates and positions for bigger aircraft (B, C, E and J) are customized VDGS included at all gates. Some of the VDGS are not very well positioned. But I had to go with the addon scenery's positioning, since I didn't want to add another VDGS pole. All E positions (and some J) are without pushback (roll out). Cargo spots (D) are untouched.
von Watsi
LYTV Tivat Airport (Pyreegue) - GSX Profile
This is a GSX profile for Pyreegue Dev Co LYTV Tivat airport. All main parkings 1 to 7 are fully customized. All main parkings have no pushback (no need). Parkings 1 and 2 with bus transfer. Parkings 3 to 7 are with customized passenger walkways (no jetways, no busses) When spawning at one of the positions, first thing you should do is 'Reposition Aircaft' (via GSX menu > reset at the same position), cause the default stop positions from the original aiport bgl are a bit off. Happy flying.
von Watsi
LIEO Olbia-Costa Smeralda (OrbX V2) - GSX profile
Custom GSX profile for OrbX LIEO Olbia Costa Smeralda V2 airport, featuring customized stands for larger aircraft, pushback at all gates, and realistic parking positions. Expect heavy ground clutter at the gates and utilize GSX for aircraft repositioning. Happy flying!
von Watsi
almost 2 years ago