Beschreibung
Config mod for the King Air 350i to fix the following issues in the stock one:
- Prop feathering now works at idle on the ground, enabling you to start/stop the engines in feather
- Fixed propeller beta on ground, prop RPM is now controllable and the aircraft no longer gets stuck in dangerous thrust settings (the engines do produce a considerable amount of idle thrust in real life, to counter this the condition levers should be in LOW IDLE, prop levers at MIN and alternate between IDLE and BETA (reverse) on the thrust levers when taxiing)
- Ignition bug fixed - ensure autoignition is set to ARM before starting. If you miss this step and ignition gets stuck on, ensure auto-ignition is set to ARM and cycle both starter switches, ignition will then switch off.
Kommentare(46)
Melden Sie sich an, um an der Diskussion teilzunehmen
AnmeldenKing Air 350 Engine Fix (Prop Feathering, Prop Speed & Ignition)
Enhance your King Air 350i experience with this configuration mod, addressing key issues with prop feathering, prop speed, and ignition functionality. Enable prop feathering at idle on the ground, control propeller beta more effectively, and fix ignition bugs for a smoother flying experience.
Nutzerbewertungen
5 Bewertungen
More Information
Versionsgeschichte
Doozy of an update here - added a few quality of life fixes! • On-ground beta angle changed, this results in about half the thrust at low idle, which should make the aircraft much more controllable on the ground. Note that the condition levers need to be in LOW IDLE for taxi - only move to HIGH IDLE when ready for takeoff as it produces a boatload of idle thrust • Reduced flap lift coefficient to counteract massive tendency to balloon in the flare - will be tweaked more over time • Significantly increased nosewheel steering angle IF THE MOD DOES NOT LOAD: • Check you don't have JD's Flight Model Mod installed - it will override this mod • Make sure you're not starting MSFS in Safe Mode as this will prevent any community mods loading