There is a problem with the fly-by-wire flight model, so please use flight_model.cfg located in the _noFBW and _noFBW _F folders.
Flight model changes.
MSFS stock fly-by-wire system was added instead of LSAS and RCWS.
If you prefer the original flight model, delete flight_model.cfg and engines.cfg.
Changed landing lights to retract and taxi lights to off position when starting from apron.
Changed fuel switch to off when starting from apron.
Instead, the fuel switch animation will be in the off position when starting from other locations.
Added missing sounds for some switches on the overhead panel, such as the battery cover and battery button.
Flap operation is changed from increase/decrease buttons to flap axis.
Instead, dial flap operation is no longer possible.
Instead, 15 and 25, which are used in the general takeoff, were added.
Flap configurations are UP,0(SLAT),15,25(takeoff only),28,35,50.
Changed internal and external lights.
Modified the position of visual effects related to the gear.
Smoke is displayed from each gear when landing.
When using sound packs
If you are using a sound pack such as FTSiM+, change the folder name according to your environment.
Also, you need to add the following to the sound.xml file of the sound pack.
Add the following line above </SimVarSounds>.
<Sound WwiseData="true" WwiseEvent="Flapshandle" ViewPoint="Inside" NodeName="HANDLING_Lever_Flaps" Continuous="false" SimVar="FLAPS HANDLE PERCENT" Units="PERCENT" Index="1"/>
For sound packs not compatible with v3.1.0.
Add the following two lines above </AnimationSounds>.
<Sound WwiseData="true" WwiseEvent="Sign2" ViewPoint="Inside"/>
<Sound WwiseData="true" WwiseEvent="Signs" ViewPoint="Inside"/>
Known issues
When connected to autopilot, the plane may swing to the left or right.(Might be fixed by adjusting nav_ex1PID or FlightLevelPID in ai.cfg.)
Glide slope tracking is not good.(Need to adjust glideSlopePID in ai.cfg.)
Auto thrust deviates from the specified speed.(Need to adjust throttlePID in ai.cfg.)
Rudder movement becomes strange when landing. If it is the same as this problem, it may be improved in the next update.
ai.cfg contains A32NX code for FlyByWire Simulations and saltysimulations salty-747 code.
1 months ago
nismo8787
2 months ago
nathecat
4 months ago
EduMCfly
tried it out and had some problems...
.landing: it was bringing the plane up and hard to bring it down
.rudder: the rudder did not show it was moving in the configs/outside of the plane
.alirons: it was very hard to move the plane left and ight while flying
.autopilot :it did not work...
10 months ago
8 months ago
SHEFFIELD704606
jrpilot16
Very keen to test this out, thank you.
11 months ago
Godzilla32
Thank you so much it makes the plane actually so much better.
11 months ago
How do I Install?
11 months ago
That1AE86
WaveZ
how do you install it?
11 months ago
crplane273
BRO THANK YOU
11 months ago
crplane273
how do you plan to develop this mod, because i think that it would be great if this plane got some love
11 months ago
R_Memories
I'VE BEEN WAITING THIS for OVER HALF YEAR:THANK YOU
半年以上待っておりました、ありがとうございます
11 months ago
NezNok