THANK YOU FOR YOUR SUPPORT OF MY UPLOADS. THE FILES YOU ARE LOOKING FOR ARE NO LONGER STORED AT THIS LOCATION. I HAVE DECIDED TO RELEASE ALL AIRPORTS AT ONCE STORED UNDER THE FIRST LETTER OF THE AIRPORT'S ICAO CODE. DOING IT THIS WAY ALLOWS ME TO UPDATE QUICKLY AND IN A MORE ORGANISED WAY.
PLEASE GO HERE https://flightsim.to/profile/Killamarshian/uploads TO ACCESS THE AIRPORT YOU ARE LOOKING FOR.
THANK YOU AGAIN.
Gatwick Airport (EGKK), is a major international airport near Crawley, West Sussex, England, 29.5 miles (47.5 km) south of Central London. In 2022, Gatwick was the second-busiest airport by total passenger traffic in the UK, after Heathrow airport, and was the 8th-busiest in Europe by total passenger traffic. It covers a total area of 674 hectares (1,670 acres). Gatwick opened as an aerodrome in the late 1920s; it has been in use for commercial flights since 1933. The airport has two terminals, the North Terminal and the South Terminal, which cover areas of 98,000 m2 (1,050,000 sq ft; 117,000 sq yd) and 160,000 m2 (1,700,000 sq ft; 190,000 sq yd) respectively. It operates as a single-runway airport, using a main runway with a length of 3,316 metres (10,879 ft). A secondary runway is available but, due to its proximity to the main runway, can only be used if the main runway is not in use. In 2018, 46.1 million passengers passed through the airport, a 1.1% increase compared with 2017 - Wikipedia
These files are for use with JustFlight’s FS-Traffic utility only.
You have the choice of installing Arrivals and Departures with the following sheduled frequencies:
1 flight per hour
2 flights per hour
4 flights per hour
6 flights per hour
12 flights per hour
20 flights per hour
30 flights per hour
You may mix and match the files for instance 30 flights per hour Departures with 4 flights per hour Arrivals. The choice is yours
Even flight numbers are departures and odd flight numbers are arrivals.
See screenshot for my recommended settings.
The flights are fictitious but the airlines and aircraft are representative of operators at the airports.
If this is popular, I will make more airports available on request. Please put your requests in the comments section.
Copy the .ini file from your preferred Departures folder to your Community\justflight-fstraffic-module\Data\Schedules folder.
Copy the .ini file from your preferred Arrivals folder to your Community\justflight-fstraffic-module\Data\Schedules folder\Arrivals folder.
I recommend you back up the original files first.
PLEASE RATE THIS UPLOAD.
IF YOU LIKE MY WORK PLEASE HIT THE LIKE BUTTON. THANK YOU.
If you are having issues with a high volume of arrivals, see the link below.
https://flightsim.to/file/51431/fs-traffic-arrivals-files
1 years ago
Killamarshian
Brilliant! Not sure what is going on with FSLTL but since last update aircraft just push back and disappear - what you have done makes all the difference as far as immersive experience goes with FS Traffic
1 years ago
JimmyBean