2023/11/10 New Ver1.3(Ver1.3.1)
ファイルを OLD Ver1.3 から New Ver1.3(Ver1.3.1)に置き換えました。
1 JETWAYを作り変えました。(V1.3はデカすぎてはみ出していた・・・)
2 滑走路のタイヤ跡 などを作り変えました。
3 滑走路にギザギザをいれたかったのですがうまくいかず断念。(ギザギザを濃くすると タイヤ痕が薄くなるため)現在かすかにギザギザが見えます
4 ターミナルの銀色の屋根のマテリアルを作り変えました。ノーマルマップを入れていましたが、違和感があるので外しました。その結果サイズが0.4MBほど小さくなりました
5 TEXTUREを貼っていない部品を見つけたので貼っていきました。
6 エプロンの汚しを研究して 一応GATE8~14あたりを限定して汚しました。
フランツルツーバーさんが有料級のセントレアシーナリーをフリーで出しているので、
私のほうは、「バージョンUP」は控えまして ファイルだけ入れ替えました。
掲載写真は10枚目(名鉄)以外はすべてv1.3.1のものに差し替えました。
2023/11/10 I created V1.3.1.
I didn't version-UP and just replaced the file Ver1.3 TO Ver1.3.1.
1. JETWAY has been redesigned.
2. Fixed tire marks on the runway, etc.
3. The material of the terminal's silver roof has been changed.
5. TEXTURE was pasted on parts that did not have TEXTURE pasted.
12 days ago
Mental_G
King Dev
1 years ago
Greazer
KAZEさん、VDGSの設置更新有難うございます。
VDGS Block-in時の functionはOK でした。!
引続き”KAZEさん Version”を愛用させていただきますので、今後とも宜しくお願いします!!
1 years ago
ありがとうございます。
1 years ago
KAZE
katsuoji65
Lovely work!!
2 years ago
totheskies
小松をMSFS向けに変換中のScherzoさんが、カスタムjetwayの実装に成功し
近々正式版に反映されるそうです。そちらを参考にぜひ青い搭乗橋をつけていただきたく思います。
p.s.) こちらのフリー版仁川にも窓付き搭乗橋が一部採用されていました。
2 years ago
NezNok
実は有料のものも所有していますが、こちらしか使っていません(苦笑)。それぐらい素晴らしいです!これからもありがたく使わせていただきます。いつの日か、ボーイング博物館等、周りの建屋も追加されるとうれしいです。
2 years ago
ホントですか。信じられません(笑) あちらとの違いは「軽量化」です。900MB対 7MBですから。ということで建物の追加は最小限におさえ、通常コースで見えない建物は作らない、これがモットーです。
2 years ago
KAZE
maids01
Looks great, but getting some water "steps" near where you changed the elevations at the end of both runways.
2 years ago
I don't raise the airport, I lower the sea. This is to make the operation lighter and to stabilize the operation in the airport. If I raise the land
the movement becomes unstable and he MSFS has the problem that the object goes up and down and the movement becomes unstable.
2 years ago
KAZE
DownLow70
Great job on fixing the detailed scenery in this version up!!
今回も素晴らしい作品を有り難うございます。
特にタワーがよりリアルな姿になりGoodです。また、Runway とTaxiway入口をクロスしていた”Runway side strip marking”の修正までしていただいたのは最高です。
2 years ago
コメントありがとうございます。
・・・邪魔な線の件ですね(笑)そこに気づいてくれてうれしいです。
2 years ago
KAZE
katsuoji65
plaese also RJBB like this but with interior
3 years ago
Tanaka123
It'll be great to have custom jetway someday
3 years ago
If it doesn't move , I can make it, but if it move - - -
3 years ago
KAZE
MisakaSkywalker
Fantastic job !
Thank You
3 years ago
Thank you very much.
3 years ago
KAZE
filipo840
Great start, just need to replace the default tower that came with MSFS which they all look like Changi and Schiphol tower. Thank you !!
3 years ago
Well, thank you for your feedback.
I will make it if I have a chance.
3 years ago
KAZE
B748hornet1
swag mode
3 years ago
Oh thank you, Mr. Kui.
3 years ago
KAZE
kui
I am very happy to be able to use accurate auto land at RJGG😄. I am excited to see that you are planning to create the terminal. It would be great if you will create the skydeck together😆.
3 years ago
Thank you very much.
Of course, I also make a sky deck.
3 years ago
KAZE
GrandeMaison
Great work! 😊 I think there are many of us who really enjoy flying the active volcanoes of Japan but they are not so beautiful in the sim. Could I recommend adding them to your collection? Today Mt Otake on Suwanose Island of Kagoshima Prefecture erupted so I flew there but poorly textured 😞
3 years ago
I will strengthen the landing landscape with A320. thank you.
3 years ago
KAZE
perfectionman