About this addon
✈️ ApronLife PRO — Ground Services & Real Schedule for AI Traffic
ApronLife PRO 1.5.8 · 🆕 Hangar towing · 🆕 Smarter ground handling for your own aircraft · General aviation ground handling · 🤝 Official BeyondATC partner · MSFS 2024 & MSFS 2020 · FSLTL or AIG · also works with AIG Traffic Controller, SayIntentions, VATSIM (or similar) · GSX Pro optional – own passengers, no GSX needed
🇬🇧 English below · 🇧🇷 Português mais abaixo
🇬🇧 English
Your airport, running on its real schedule. ApronLife PRO brings the apron to life around AI traffic: GSX vehicles, passengers, ground crew and jet bridges serving every parked airliner – with its own passengers, no GSX needed – and now general aviation and business aircraft too, including your own aircraft. In PRO, each aircraft follows its real flight, so the turnaround ends at the real pushback time – and with BeyondATC, it follows BeyondATC's own schedule, right up to the clearance call. You can follow everything from a departure board inside the simulator.
ApronLife PRO is a complete, standalone program. It includes everything from the free ApronLife plus the features below. You don't need the free version installed.
🆕 New in 1.5.8: your hangar and a smarter My Aircraft
- 🏠 Hangar towing: record the way out of your hangar once with your own aircraft. Then "Tow out of the hangar" takes your aircraft to the stand you choose, arriving already lined up, and "Tow to the hangar" brings it back inside after the flight – avoiding the other aircraft. 🎥 See it in action
- 🚜 Real pushback feel: your aircraft's wheels roll and the nose wheel steers with the Caddy or Lektro, turning around the main wheels like a real tow. The tug can be chosen per stand or per aircraft. Business jets ask you to start the engines before the pushback (like GSX), and the simulator's own wheel chocks (MSFS 2024) are removed first, or you are asked to remove them.
- 🚪 Doors that open by themselves at the right moment of the service on popular aircraft: Cessna 172, 185 and 208 Caravan, Vision Jet, TBM 930, PC-12, King Air 350, Citation CJ4 and DA62.
- 🧳 Baggage one by one: the ramp agent takes each suitcase from the cart and puts it into the baggage door. Aircraft without their own stairs (DA62, Cirrus, Cessna 172…) get a boarding step, and passengers crouch at the top of the stairs.
- 🔔 Notices at every step inside the simulator (chocks and cones, GPU, fuel with %, baggage, passengers…), "Services finished, call the pushback", and an option to offer the pushback automatically.
- 🚐 A livelier apron: general aviation vehicles and people now come from further away along the service roads, give way to each other, keep clear of cones and wings, and leave the same way. The GPU, the baggage cart and the greeter come from behind the aircraft, and the fuel truck arrives with its hose side facing the aircraft.
- ⚙️ New settings for how many general aviation fuel trucks and ramp agents work at the same time, and new default profiles for the Cessna 162 and 172, Citation CJ4, Cessna 421, DA62 and PC-12.
- 📦 Faster updates of the people package: only the characters that changed are downloaded.
- Plus many fixes – see the full changelog. The jet bridge package is updated with this version: restart MSFS 2024 once.
🆕 1.5.7: general aviation
Small and business aircraft now get their own ground handling, instead of being left alone or treated like an airliner. From a Cessna 172 to a King Air, TBM, PC-12, Citation, Phenom, Latitude, Praetor, Gulfstream or Global:
- 🦺 On arrival: a marshaller (turboprops and jets), chocks and cones, and a ground power unit on jets.
- 🚐 Passengers and crew: passengers walk or are picked up by van, SUV or limousine, depending on the aircraft. VIP flights get a red carpet and a greeter. The crew walks or rides a golf cart or crew van.
- 🧳 During the stay: a baggage cart, refuelling with the hose to the wing, and ground power.
- 🛫 On departure: the pilot's walk-around, boarding, and the chocks coming off when the engines start. Aircraft that need a tug get a small one (Caddy or Lektro).
- ⚙️ Same rules as airliners: your radius, maximum aircraft, random turnarounds, the real schedule (or BeyondATC's) and the Performance switches. General aviation shows in the Flights tab and the in-sim panel too.
- 🖥️ MSFS 2024 and 2020: ApronLife installs the general aviation vehicles by itself.
✈️ New "My aircraft" tab (general aviation for now)
- Ground services for your own aircraft: deboarding, boarding, a full turnaround, or each service on its own (chocks and cones, GPU, fuel, baggage).
- The door opens and the passengers climb in (over the wing on low-wing aircraft like the DA62, DA42, Cirrus or Bonanza).
- Pushback with a tug, backwards or forwards, straight or turning left or right. The tug waits for you to release the parking brake and disconnects after you set it again.
- Pop-up notices inside the simulator ("Ready for pushback?", parking brake, clear to taxi), and a live adjustment to place every item around your own aircraft type.
🆕 Also in 1.5.7
- 🛠️ Studio for general aviation: aircraft profiles with their own drawing and every point adjustable in metres (chocks, door, passenger car, fuel, baggage, cones, tug hitch), live adjustment in the simulator, and a new general aviation vehicles editor.
- 🌗 Light theme for the app window and the in-sim panel.
- 🔊 Vehicle sounds: engine, start-up and door sounds for the general aviation vehicles.
- 🇨🇳 Chinese (Simplified): app, license window, in-sim panel and Guide.
- 🏷️ Airline logos in the Flights tab, the in-sim panel and the airport board.
- 📱 Airport board on other devices: a QR code opens it on a tablet, phone or another PC on the same Wi-Fi.
- 🧭 Prepare the destination in flight (Beta): with your SimBrief plan, the arrival airport is read during cruise so it starts faster.
- "Awaiting pushback" status, vehicles that stay on the apron in sceneries without service roads, simpler Settings, GSX baggage carts joined by their tow bars, and pinning to the taskbar now pins ApronLife itself.
🆕 1.5.6
- 🤝 Official BeyondATC partner: with BeyondATC running, its aircraft follow BeyondATC's own schedule, so each turnaround wraps up right at the IFR clearance call. 🎥 See it in action
- 🖥️ Airport board, a better Flights tab, per-airport jet bridge ads, ready-made profiles for 12 common airliners, and redone remote stands.
⭐ What PRO adds
- 🤝 BeyondATC integration (official partner): with BeyondATC running, its aircraft follow BeyondATC's own schedule – each turnaround ends right at the clearance call, landed aircraft already know their next flight, and departures show the runway and SID BeyondATC assigned. BeyondATC keeps its jet bridges and pushback. One switch, on by default.
- 🛩️ General aviation ground handling: small and business aircraft get their own services – marshaller, chocks and cones, passengers by van, SUV or limousine (VIP with red carpet), crew by golf cart or van, baggage, fuel, GPU on jets and a small tug – in MSFS 2024 and 2020.
- ✈️ My aircraft (general aviation for now): ground services and pushback with a tug for your own aircraft, with passengers boarding through the door or over the wing, doors that open by themselves and hangar towing.
- 🕒 Real Schedule: every parked AI aircraft follows its real flight. ApronLife matches the callsign against a typical-week schedule of 1,500+ airports worldwide, built from real ADS-B flight data.
The turnaround is timed to finish at the real pushback.
- An aircraft that just landed is serviced until the pushback of its next flight.
- Aircraft that are not leaving soon stay quiet, with only the GPU, until their turnaround starts.
- The schedule is downloaded and updated every week by itself; there is nothing to install.
- With BeyondATC connected, the schedule follows the simulator clock, like BeyondATC itself. For other traffic, pick real time or sim time (AIG and similar).
- You can turn the Real Schedule off at any time to go back to random turnarounds.
- 🛫 AIG Traffic Controller flight plans: with AIGTC running, ApronLife PRO follows the flights in your own AIG flight plans. Each parked aircraft is matched by its registration, so ApronLife knows the exact flight it arrived on, its next flight and when it leaves.
- 📋 Flights tab: lists the aircraft on the apron, the departures for the next 3 hours and the arrivals.
For each aircraft: callsign, type, stand, from/to, next flight, a pushback countdown and a live status ("passengers 64% · fuel · bags", "Awaiting clearance").
- Click an aircraft to send the camera to it; sort by any column; search by callsign.
- Session report (turnarounds, passengers, bags, jet bridges, pushbacks…) to copy or save as an image.
- Times in UTC, airport local time or any UTC offset.
- 🖥️ Airport board: a full-screen departures and arrivals board like the screens in a real terminal, in your browser, on a second monitor or on a tablet/phone on your network.
- 🖥️ In-sim panel (MSFS 2024 and 2020): an ApronLife button on the simulator toolbar opens a panel styled like an airport departures board, with flap-tile callsigns.
Tabs: Flights, Departures, Control and Profiles.
- ApronLife starts from that button, like GSX.
- One-click modes: Light / Medium / Full, Everything / Bridges only / No people, and Bubble mode.
- 🎬 Cinematic camera, Drone view & Cinema mode: click any aircraft in the panel and the camera flies to it and slowly orbits it, like a film shot.
Cinema mode (MSFS 2024): the camera tours the apron by itself, from aircraft to aircraft.
- Drone view lets you fly the camera around the aircraft from the panel.
- "Back to the cockpit" returns you to your aircraft.
- MSFS 2020 doesn't allow the camera move, so there a red arrow marks the aircraft instead.
- 🌉 ApronLife jet bridges: the scenery jet bridges near you are replaced by ApronLife bridges that dock to AI aircraft. They turn, extend to the door, close the canopy and retract before pushback, and passengers walk through them as usual.
They don't come off the aircraft when you move the drone camera away and back, a well-known simulator bug with the default bridges, so nearly every gate stays docked for as long as it's needed.
- Several models: light, dark, realistic (weathered) and a detailed "Modern apron" bridge with a telescopic column, an open cab and working wheels.
- Advertising banners on the bridge sides: 8 fictional brands or your own images (with your own names), and a per-airport ads folder with as many images as you like, rotating 8 at a time. Changes show right away.
- Model, banner and on/off can be set per airport and per stand.
- The bridge package installs itself in your Community folder.
- Your own stand and iniBuilds multi-jetway gates keep the scenery bridge (GSX / Ctrl+J). The original bridges come back when ApronLife closes.
- MSFS 2024 only for now: ApronLife jet bridges are not available in MSFS 2020 yet; there the simulator's own jet bridges are used.
- 🛠️ Profile Studio, airport profiles: an airport map with all its stands. It also works with the simulator closed, and any airport can be read straight from the sim without flying there. Per stand you choose:
the ApronLife jet bridge on or off, and which model;
- buses, fuel truck or hydrant;
- which services happen;
- which installed vehicle serves each one.
- ✈️ Profile Studio, aircraft profiles (by type: A20N, B738, B77W…) – ready-made profiles for 12 common types included:
Which services the aircraft gets, and the vehicle model for each one.
- Where each vehicle parks (forward, outward, height, rotation).
- Cargo door positions, and where the jet bridge meets the door.
- Front, rear or both stairs at remote stands.
- Which wing it refuels from (auto uses the left wing for the airlines that do it that way).
- 🎛️ Live adjustment in the simulator: a test aircraft with all its vehicles appears behind yours, and every slider moves the real vehicle instantly, so you can fit each vehicle to the doors by eye.
- ⚙️ Settings and performance per airport: each airport can have its own vehicle count, people, bridges, bubble mode and so on, loaded automatically when you arrive.
- 🔁 Sharing: airport and aircraft profiles are exported and imported as files, like GSX profiles.
- 🧭 SimBrief integration: reads your latest flight plan and shows the flight, origin, destination, alternate (with runways) and times. Shortcuts open the airport profiles before you fly. Authorized by Navigraph.
- 🧳 Two belt loaders: front and rear holds served at the same time, each with its own belt loader or container loader, tug and baggage carts or container dollies, timed with fuel and catering. Automatic on widebodies with containers; choose it per aircraft type in the Profile Studio.
- 🚌 Remote stands with two stairs: front and rear stairs with two buses at the same time, each stairs with its own passenger barrier lane.
- 🔄 Automatic updates: when a new version is out, ApronLife downloads and installs it by itself the next time it opens, and shows what's new.
- 🌍 7 languages: English, Português, Español, Français, Deutsch, Italiano and 中文 (Chinese, Simplified), in the window, the guide and the in-sim panel.
- 🌗 Light or dark theme for the window and the in-sim panel.
🛬 Plus everything from ApronLife
- Complete turnarounds for AI aircraft: GPU, fuel truck or hydrant dispenser, catering (the box rises to the door), lavatory and water trucks working like in GSX, belt loaders with baggage carts (the bags really move), and container loaders with LD3 dollies on widebodies. Vehicles and staff use the GSX liveries of each stand or airline.
- AIG cargo doors: on the AIG models with animated holds, the hold opens smoothly when the loader arrives and closes when it leaves.
- Remote stands: stairs, buses and passengers walking between them, with GSX passenger barriers.
- Crew and cleaning in the right order: the crew leaves, cleaners board, the new crew boards, then the passengers.
- Passengers inside the jet bridges – ApronLife's own or GSX's – following your GSX paths when there are any.
- Ground staff: wingwalkers, loadmaster, fueler, ramp agent, and marshallers with wands for arrivals and pushback. Pushback is done with a tug.
- Apron inspection cars patrol the aprons near you.
- Smart routing: vehicles plan their routes around aircraft, bridges, the terminal, other vehicles and people. They queue, give way and stop for taxiing aircraft.
- Time of day and weather: quieter aprons at night, weather outfits, and de-icing in the cold.
- Uses your GSX profiles: passenger paths, parking systems, hydrant or truck fuelling, "no bus" stands and handling liveries.
- Performance controls: Light / Medium / Full presets, Bubble mode, and on/off switches for every feature.
- Works automatically at the airport nearest to you: it starts after you land and pauses when you take off (or keeps running while you fly, with "Keep running when airborne").
✅ Requirements
- Microsoft Flight Simulator 2024 or 2020 on Windows 10/11.
- An AI traffic injector that parks airliners at gates: BeyondATC (official partner, recommended), or AIG Traffic Controller, SayIntentions, VATSIM traffic or similar. ApronLife does not create traffic; it serves the traffic that is already parked.
- FSLTL or AIG models for the AI traffic.
- GSX Pro (FSDreamTeam): optional, but recommended.
Without GSX, ApronLife uses the simulator's own vehicles, the jet bridges and its own passengers.
- With GSX you also get stairs and buses at remote stands, GSX passengers, ground crew, marshallers, baggage carts, container loaders, hydrant dispensers and the liveries from your GSX profiles.
- Nothing from GSX is redistributed.
- An internet connection while you use ApronLife PRO (license check, real schedule and passengers package).
🔑 Installation & license
- Run the ApronLife PRO setup (installs for your Windows user, no admin rights).
- On the first start, enter the e-mail you want for your license (twice) and the license key you received with your purchase. The key is tied to that e-mail on the first activation, so check the e-mail carefully. If you typed it wrong, contact support.
- Start MSFS, load a flight at an airport with traffic, and press Start, or use the ApronLife button on the simulator toolbar.
- One-time purchase. Each license includes up to 3 activations. "Release this PC" frees one.
- The Real Schedule, the passengers package and new versions are updated through the app.
⚠️ Good to know
- The Real Schedule follows real-world flights. Small differences can show up between your traffic injector's schedule and what ApronLife expects. Aircraft without a matching flight keep the usual random turnaround.
- With BeyondATC Live Traffic, a parked aircraft only gets its real flight when it starts to leave, so its departure time is an estimate: the turnaround finishes a bit earlier and the aircraft waits for its clearance with the jet bridge and GPU still connected.
- AI aircraft passenger doors stay closed: FSLTL and AIG models have no animated passenger doors.
- Only the airport nearest to you is served. Big hubs take a minute to fill up; use Bubble mode or the Light/Medium presets there.
🛠️ Support
💬 Discord: support, airport reports and news: https://discord.gg/dw3rzRc5xG
📧 Contact: apronlifeofficial@gmail.com
Changelog
v1.5.8 ------ [EN] IMPROVEMENTS - General aviation people, vehicles and objects now stay on the ground the same way as the airliner ground services: no more floating, sinking or small jumps (people now walk on the ground like the airliner crews). - General aviation: only our own ground power unit, pushed by the ramp operator (no more GPU truck), also for aircraft between turnarounds; refuelling is always done by the ramp operator. - Softer lights: vehicle headlights and tail lights about 70 % less bright, the marshaller's wands about 85 % less. - General aviation vehicles (passenger cars, crew vans, fuel truck and the pushback tug) no longer appear next to the aircraft: like the airliner ground services, they come from further away along the airport's service roads and leave the same way. Where the scenery has no service roads near the general aviation stand, they arrive as before. - General aviation people (ramp agents with chocks and cones, the ground power and baggage cart operators, the pilot's walk-around, the greeter, and passengers and crew walking to and from the building) no longer pop up next to the aircraft: they walk in from further across the apron and walk away before disappearing. - General aviation: ramp agents already carry the chocks and cones when they appear, and come from the building side of the apron (never from the taxiway). - General aviation vehicles and people appear already at the right height (no small adjustment in the first moment), and vehicles finish parking smoothly, without a jump into their final position. - General aviation vehicles never drive through a person: they wait, and if the person stays in the way they drive around. - General aviation vehicles now look at the space around them before leaving: they drive away forwards when there is room and only reverse when needed, without passing through an aircraft wing; arriving vehicles take the direct way to their spot instead of driving past the aircraft and coming back. - General aviation passengers walking to and from the aircraft follow the passenger path of the stand's GSX profile, when it has one (like the airliners). - General aviation vehicles now stop and give way to each other and to the airliner ground services and people (and the other way round), and drive around a vehicle that is stopped in the way. - ApronLife people package: when a new version comes out, ApronLife now downloads only the characters that changed instead of the whole package (about 1.6 GB). The first download is split in 4 parts at the same time (much faster far from the server), continues right away when the connection drops, and the log shows the speed and the time left. - Sceneries without service roads for vehicles: the ground service vehicles (airliners and general aviation) no longer drive along the taxiways — they appear right behind the aircraft (or next to their spot) and disappear just outside the stand when they leave. - In-sim panel: the X of the ApronLife panel now only hides it (like the GSX menu). Open it once from the toolbar at the start of the flight: when the services of My Aircraft end it pops up by itself as a small window with just the pushback directions, stays until you release the parking brake, and hides again. - My Aircraft: in-sim notifications for each step (cones and chocks, GPU, fuel with the % until it ends, baggage, passengers…), "Services finished, call the pushback", and "Set the parking brake" after the pushback until you set it. New option: offer the pushback automatically when the services end. The in-sim tab is now called My Aircraft. - My Aircraft: the backwards pushback buttons now say where the TAIL goes ("Tail left" / "Tail right"), matching the arrows drawn on them (in the in-sim panel and in the app). - General aviation passengers walking to and from the aircraft now keep the queue: each one follows the one in front and waits, without walking through each other. - General aviation: the ramp agent carrying the chocks walks faster. - General aviation aircraft profile editor: the boarding door is now marked by a small yellow arrow on the ground (it follows the slider) instead of a person. - General aviation: ramp agents on foot now come from (and leave towards) the back of the aircraft, away from the taxiways; passengers walk with the same improved steps as the crew (heel down, front foot landing on the ground). - General aviation baggage: the ramp agent now loads the suitcases one by one — he takes each one from the cart and puts it into the aircraft's baggage door (and the other way round when unloading), one suitcase per passenger (up to 4). The baggage door (where the agent puts the bags) can be adjusted in the aircraft profile — Baggage door: forward, right and height, shown by a yellow arrow. - General aviation ramp agents: they walk straight (diagonally) to their work and back, instead of first going in front of the nose; the baggage agent stops the cart without it rolling, puts the suitcases into the baggage door from outside the aircraft (on the DA62 at the height of the nose compartment), changes between walking and lifting without jumps, and backs the cart out a little before turning when it is parked close to the aircraft. The chocks sit a bit higher and closer together in his hands. - General aviation baggage agent: he walks around the cart to its side to pick each suitcase (no longer through the cart), holds it with both hands on its sides (also when standing up and carrying it), puts it into the baggage door with a placing movement, like a box onto a shelf, and leaves pushing the cart without stopping at the end. - General aviation chocks: every wheel gets a pair of chocks — both main wheels and the nose wheel (before, many aircraft got chocks on one or two wheels only). - General aviation baggage agent: the cart is parked farther from the aircraft, his hands close around the suitcase, he bends and stands up more smoothly, the suitcase just goes down from his hands into the baggage door, and he keeps both hands on the cart when he turns after backing out. His fingers stay straight against the suitcase, he no longer steps in place before putting it away, and he puts it farther inside. The cart now waits about 6 m from the aircraft, and he raises the suitcase to the baggage door height set in the aircraft profile (Baggage → Height), where it is put away. - Aircraft profile editor (general aviation): the passenger door and the door foot are now a single position (Passenger door, with the rotation); its yellow arrow is shown at the door height; a Simulate button next to the passenger door, car and baggage door plays the boarding or baggage animation once (click again to restart) — it no longer runs by itself; in live mode the passengers climb the wing like on your own aircraft, leave the van by the door facing the aircraft, and the tug and fuel truck sit on the ground (they were sunk). Simulate works right away (if live mode is still setting up, it plays as soon as it is ready), the baggage cart starts close to the aircraft in the simulation, the suitcases no longer turn in his hands, and the passenger door has a choice: Animation: climb the stairs / just disappear. - General aviation: new, sharper textures for the wheel chocks (black rubber with deep yellow ribs, like real ramp chocks), the baggage cart and the suitcases (front pocket, luggage tag, brighter colours that no longer look black at night). - General aviation vehicles: the wheels now always turn the way the vehicle moves (forwards or in reverse, also the pushback tug of My Aircraft) and the front wheels steer left and right in the curves, straight when driving straight. - General aviation aircraft profile editor: new "Passenger door" option "Ahead of the wing / Behind the wing" — passengers always walk to and from the door that way, whatever the boarding animation (on the DA62, behind the wing). - General aviation baggage agent: with the wide suitcases his hands are now open a bit more, holding the suitcase by its sides (no longer inside it). - My Aircraft: the "Live adjustment" button now opens your aircraft's profile in Profiles → Aircraft and starts the live adjustment there — a single place to edit the aircraft profile. - General aviation passenger step: aircraft without their own stairs (DA62, Cirrus, Cessna 172…) now get a 2-step boarding step, brought and taken away by a second ramp agent; passengers climb it (on the DA62 it stands at the wing trailing edge, where they step onto the wing). Aircraft with stairs (Citation, TBM, King Air…) only if you turn it on. In the aircraft profile editor: On / Off / Auto and its position (item "Passenger step"), also in live mode. - Pushback tug chosen per stand and per aircraft: in the airport profile each stand (or the whole airport) can choose the airliner tug (GSX / simulator) and the general aviation tug (Lektro / Caddy); the aircraft profile has the same choice. Order: stand > aircraft profile > automatic (as before). - Airport profile: the ropes along the VIP red carpet (business jets) can be turned off per stand or for the whole airport. - My Aircraft (app and in-sim panel) — hangar towing (general aviation): record the route of a hangar once with your own aircraft (Profiles → Airport → Hangars: aircraft inside, Record, move it out of the door, Finish). Then "Tow out of the hangar" takes your aircraft along that route to the stand you choose, avoiding the other aircraft, and "Tow to the hangar" brings it from wherever it is parked back inside. Same steps as the pushback: you are asked to shut down the engine and release the brake, and to set the brake at the end. Without a recorded hangar the option tells you why it is not available. - In-sim panel, departures: flights of the next day now come last (as on the browser board), and airline logos keep their own proportions (no more stretching) and use the free space next to the time. - BeyondATC: an aircraft that BeyondATC only has as an arrival (no departure flight) now gets the arrival services only — no boarding, fuel or catering, and it no longer waits for a pushback; if BeyondATC publishes the departure later, the turnaround starts with that schedule. - General aviation: new settings "GA fuel trucks" and "GA ramp crew" (Traffic): how many fuel trucks and ramp agents work at the same time on general aviation aircraft; the other aircraft wait their turn and the same truck or ramp agent goes straight from one aircraft to the next (your own aircraft is never kept waiting). - General aviation passenger step: new two-sided step with handrails and new textures (painted metal, non-slip treads, brushed aluminium rails); the ramp agent carries it by the rails and puts it down on the ground (no longer floating or with his hands inside it); passengers only do the stair climb on the step (not a second time onto the wing). - General aviation aircraft profile editor: the passenger door options are clearer (Auto / Ahead of the wing / Behind the wing) and the selected option is green like the other options; the tug choice for the hitch now says "Auto". - In-sim panel, Flights tab: wider columns so the pushback and status columns (and their titles) no longer overlap. - Settings and Performance: the "Custom" preset label now has the same size as the preset buttons. - Airport profile editor: the hangars now sit in their own "GA — General aviation" section. - Hangar towing: "Tow out of the hangar" now asks which stand to go to (in the app and in the in-sim panel), and the tug takes the aircraft straight to the stand along a smooth curve, arriving already lined up — nose-in when the stand faces the way you come from, otherwise pushed in tail-first like on a real apron (no more circles at the end). - Hangar towing: the hangar options in the in-sim panel show the full text (one per line, nothing cut off); the progress bar of the turnaround no longer appears during a tow, and at the end it says "Aircraft on the stand". - Hangar editor (airport profile, with your aircraft in the sim): arrows to move your aircraft forward, back, left and right and to rotate it (fine 0.5 m / 2° or coarse 2 m / 10° steps), "Mark point", the list of points (click one to take the aircraft there; ✕ deletes it), "Release the aircraft" to taxi on your own, and "Edit" for a hangar already saved. - My Aircraft pushback and hangar towing (general aviation): the aircraft now turns around its main wheels and the nose draws the curve, like an aircraft pulled or pushed by the nose wheel (no more sliding sideways in the curves); the Caddy or Lektro turns with the nose wheel, like a real towbar. - Hangar towing: the route of each hangar is now followed like a real tow (the aircraft never slides sideways, even if the route was recorded with slew). Only the exit route is recorded (point 1, the parking spot inside the hangar, is set with the first "Mark point"): to put the aircraft in the hangar, ApronLife tows it on its own (avoiding the other aircraft) straight to the parking spot inside the hangar — the first point of the exit route — arriving with the recorded heading. Between the hangar and the stand the tow follows the airport's taxiways and apron taxilanes (never across a runway), and only leaves them for the final curve into the stand or the hangar. - Profiles > Aircraft: the list is split into General aviation and Airliners, and the types parked at the airport right now (ready for live adjustment) come first, with a green border. The general aviation GPU cable follows the plug when the socket height changes. My Aircraft opens the door and baggage door of your aircraft the way taught in the new door test. - My Aircraft pushback and hangar towing (general aviation): your aircraft is now moved by the simulator itself along the tow path, so its wheels roll (the inner wheel slower in the curves) and the nose wheel steers with the tug. If the aircraft cannot be followed, it falls back to the previous way. - Pushback tug of My Aircraft: no more shaking from side to side; it turns smoothly with the nose wheel. - My Aircraft: the passenger door and the baggage door(s) of popular aircraft now open and close by themselves at the right moment of the service (Cessna 172, 185 and 208 Caravan, Vision Jet, TBM 930, PC-12, King Air 350, Citation CJ4 and DA62); aircraft with more than one baggage door open all of them. - General aviation aircraft profile editor: the GPU can now be rotated (its cable turns with it); in live mode the GPU cable is the same one used in the service and follows the socket position and height; the Forward slider now goes up to 25 m (for sockets at the tail, like the Citation CJ4). - Piston twins (Cessna 421 and similar): the GPU can be turned on in the aircraft profile, and its items (GPU and socket) then appear in the editor. - New default aircraft profiles: Cessna 162, Cessna 172, Citation CJ4, Cessna 421, DA62 and PC-12 updated with the new positions; the Vision Jet no longer gets the passenger step (its own stairs open). - General aviation: the ground power unit, the baggage cart and the greeter now come from behind the aircraft and leave the same way. The GPU is lined up before it reaches the aircraft and never goes under the wing, and the fuel truck now arrives with its hose side facing the aircraft (driving past and making a U-turn when needed) instead of turning on the spot. - General aviation: people pushing the baggage cart or the GPU, and the vehicles, now keep clear of the cones and of the wings. - My Aircraft (general aviation): the next service no longer waits for the GPU operator, the passenger car or van and the greeter to disappear. - Passengers now crouch at the top of the aircraft stairs when boarding and start crouched when deboarding. FIXES - My Aircraft (app and in-sim panel): what is happening now (fuel, passengers, chocks and cones…) is now shown in Spanish, French, German and Italian (it was in English). - Hangar towing: after the tug disconnects, the aircraft is released right away (it no longer stays on "Tug disconnecting" until the tug has driven out of sight). - Airport profile editor, hangars: "Finish and save" now answers on the first click (it shows "Saving…" and the hangar appears in the list right after); the recording no longer redraws the buttons every second. - General aviation: the passenger van no longer drives a loop to show a door — it arrives, stops and opens the door facing the aircraft. - General aviation: with the passenger step, passengers no longer walk in front of the wing and back again when the door option is Auto. - My Aircraft (general aviation): the fuel truck no longer stays parked and disappears — it drives away when refuelling ends. - General aviation aircraft profile editor (live mode): the passenger step no longer appears sunk into the ground. - General aviation: aerobatic aircraft (Extra 300, Sbach, Yak-52/55, Su-26/29/31…) no longer get passengers boarding or deboarding. - General aviation aircraft profile editor: the passenger door options "Climb the stairs / Just disappear" and "Ahead of / Behind the wing" were not kept when the profile was saved — fixed. - General aviation aircraft profile editor (live mode): the passenger van no longer appears sunk into the ground. - My Aircraft: boarding no longer changes the aircraft's passenger seat weights (and deboarding no longer clears them) — the aircraft load stays as you set it. - General aviation baggage cart: the small wheels no longer flicker black and white while it moves (matte rubber and hubs). - Pushback tug: when it leaves, it now drives away until out of sight instead of stopping next to the aircraft and disappearing; the operator's standing animation no longer runs too fast (it looked like it restarted all the time). - Automatic update: the previous version no longer stays open next to the new one. Its window now closes by itself (also a window hidden behind the simulator), together with its tray icon and services, and if an older ApronLife PRO is still running when the new one opens, the new one closes it first. - Jet bridges at gates where nobody was parked: the simulator's own parked and offline traffic sometimes used ApronLife's invisible jet-bridge helper as a parked aircraft, so jet bridges docked to an empty gate (and flights called "HELPER" could show up). The simulator no longer uses it. The new bridge package is installed with this version — restart MSFS 2024 once. - General aviation passengers: they now walk straight to the stairs and board (no more going back and forth at the door), crouch at the top and disappear at the door instead of walking inside the cabin. - General aviation refuelling: the operator's palm now holds the nozzle body aligned, his standing breathing no longer jumps, he no longer disappears for an instant when he starts climbing the ladder, and the hose no longer looks cut on uneven aprons. - Stands with a letter in their name (1A, 2B, 3C…): ApronLife read the letter wrong (1A came out as 1L), so the stand did not match its GSX profile section and passengers did not walk to the aircraft. Fixed (thanks to the user who found it). - General aviation vehicles and objects no longer appear in the air and then drop to the ground. - General aviation default aircraft profiles: the sliders now open at 0 on the calibrated position. - My Aircraft: the bags are now loaded at the baggage door set in the aircraft profile (on the Citation CJ4 they went to the wrong door), and the GPU stops exactly where it is set in the aircraft profile editor. - My Aircraft pushback and hangar towing: the simulator reported a collision when the aircraft still had the simulator's own wheel chocks on (Citation CJ4 and other MSFS 2024 aircraft). ApronLife now removes them, or asks you to remove them (walkaround or the aircraft's tablet/EFB) and waits, before moving the aircraft. Business jets: with the engines off the simulator also reports a collision when the aircraft is pushed (GSX asks for the same), so ApronLife now asks you to start the engines before releasing the parking brake and continues by itself as soon as an engine is running.
v1.5.6 ------ [EN] NEW - BeyondATC integration (official partner – Works with BeyondATC): with BeyondATC running, ApronLife follows BeyondATC's own schedule for BeyondATC's aircraft. Each turnaround ends right when the aircraft calls for its IFR clearance – doors closed, jet bridge retracted and ground crew clear just in time for the pushback – and an aircraft that has just landed already knows its next flight. The departures and arrivals in the Flights tab also come from BeyondATC. New "BeyondATC" card in the Flights tab (on by default); the rest of the traffic keeps the ApronLife schedule. IMPROVEMENTS - Updates now install by themselves: when ApronLife opens and a new version is available, it downloads it, installs it and opens again on the new version – no clicks needed. If ApronLife was opened by the simulator, it keeps working that way. - With BeyondATC Live Traffic: a parked aircraft taken over by a live flight that is already past its time now gets a normal turnaround (passengers, baggage) until it calls for clearance – before, it was shown at the end of boarding with nobody walking. - "Passengers walking at once" set to 0 now means no limit (before, 0 meant no walking passengers). - Busy airports (100+ aircraft): passengers near what you are looking at (the aircraft picked in the in-sim panel, the camera or your own aircraft) now appear first, and far away fewer walk at once. Before, at airports like KATL, the panel showed boarding in progress but the passengers appeared too late or not at all. - The aircraft you pick in the in-sim panel (cinematic or drone camera) always gets a busy jet bridge, even when the passenger limit is full. - With BeyondATC: when BeyondATC removes an aircraft, its vehicles leave right away; when BeyondATC restarts its traffic, the turnarounds wait for the aircraft to come back. - "Jet bridges" setting is now "Scenery jet bridges": with it off and ApronLife bridges on, only the ApronLife bridges dock (up to your limit) and the other stands are left as they are – lighter on big airports. With both off, ApronLife does not touch any jet bridge. - ApronLife jet bridges with a limit: all your ApronLife bridges now go to parked aircraft – first to aircraft with no jet bridge, then replacing the simulator's own bridge even if it is already docked. Bridges left at empty stands are moved to parked aircraft (before, at airports with overlapping stands like KATL, some stayed at empty stands). Scenery jet bridges still leave alone an aircraft whose simulator bridge is already docked. - With BeyondATC Live Traffic (or a BeyondATC aircraft with no departure time yet): the departure time is only an estimate, so the turnaround now finishes earlier – 25 min (35 on widebodies) – and the aircraft then waits for its clearance with the jet bridge and the GPU still connected. Many more aircraft now leave with the whole turnaround done. - Flights tab and in-sim panel: the "Ready" status is now "Awaiting clearance" (the aircraft is done and waiting to depart). - Flights tab, new look: BeyondATC is now a single button (Works with BeyondATC) – while BeyondATC is connected, the schedule follows the simulator clock, like BeyondATC itself, and the clock options are greyed out. The AIG folder moved to Settings. The session card got the ApronLife PRO look (also on the image you copy or save). - Flights tab: click any aircraft in the table to send the simulator camera to it (on MSFS 2020, the red arrow above it) – a "Back to the cockpit" button appears at the top. The table header and that button stay in place while you scroll, in the app and in the in-sim panel. - Flights tab and in-sim panel: click a column header to sort (click again to reverse, a third time for the default order). Aircraft with no schedule always go last, also in the default order. - Flights tab: new search box next to "Cinema mode" – type part of a callsign to show only the matching flights (on the apron, departures and arrivals); Esc clears it. - Flights tab and in-sim panel: the passengers % now counts the passengers who really walked on or off the aircraft (before, it followed the turnaround clock and could show 50% while the crew was still boarding). Before boarding starts it shows "crew boarding". - Airport board (new): a full-screen departures and arrivals board, like the screens in a real terminal – times, flight, destination, gate and status (Boarding, Final call, Gate closed, Departed, Delayed, Landed…). Opens from the Flights tab in your browser (great on a second monitor) and also on a tablet or phone on your network (network access in Settings, address + /fids). - With BeyondATC: the runway and SID BeyondATC gives each departure now show in the Flights tab, in the in-sim panel and on the airport board (e.g. "RWY 34R · LAXAS2"). - Ads per airport (ApronLife jet bridges, "Modern apron" models): in the airport profile (Studio) each airport can have its own ads folder, with as many images as you like – import them there (PNG, JPG or WEBP; best 2304 × 512) or drop them in the folder. At that airport the bridges show those images instead of the 8 from Settings, 8 at a time, changing every 10 minutes; pick an image on a stand to keep it there. Airports without a folder keep the 8 from Settings. - Jet bridge ads now change right away – no simulator restart needed (also for the 8 ads in Settings). - Jet bridge ads in Settings: your own images now keep a name – it starts as the file name and you can rename it ("Rename"). Before, every custom image showed as "your image", also in the airport profile. - Passengers: the bouncy "happy" walk is now rare (it showed up far too often). - Without GSX: a test character in everyday clothes no longer shows up as ramp agent (it was there by mistake – ApronLife's own ground crew is not out yet). - "Open with the simulator" now does what it says: off, ApronLife no longer opens with MSFS at all; on, it opens with MSFS and closes with it – and "Start the engine when ApronLife opens" decides whether the services start right away or wait for Start / the ApronLife button in the sim toolbar. Nothing changes for you after updating: if ApronLife already opened with MSFS, the option is now simply turned on. - "GSX vehicles only": the patrol cars now keep driving around the airport (GSX has no patrol cars, so before there were none at all). - If ApronLife can't reach the license server when it opens (a short internet hiccup, for example), it now shows "Connecting to the ApronLife server…" and keeps trying by itself for up to 5 minutes – no need to do anything, it opens as soon as it connects. Before, it went straight to the activation screen. Activating also tries again a couple of times before showing an error. - With BeyondATC connected (MSFS 2024): the scenery jet bridges are left to BeyondATC, which operates them itself – ApronLife only uses its own ApronLife bridges (if turned on), even with "Scenery jet bridges" on. - Remote stands, redone buses: each bus comes in along an outer lane – clear of the wingtips and of the bus already parked at the other stairs – makes one smooth curve and drives the last metres straight into its spot, without circling, spinning or crossing the passenger rope lines. It leaves straight ahead and turns out; at the rear stairs, where the wing is ahead, it first backs up a few metres. The buses of an aircraft now take turns instead of getting in each other's way, and a bus waits for people to step aside instead of driving round the aircraft. - Remote stands, a tidier apron: when boarding is over the stairs back away and leave once the buses have gone (before, they parked in the buses' lane), and the wingwalkers waiting for an AI pushback only come out after the buses and stairs have left, just inside the wingtip. - Stairs turned in the aircraft profile: passengers now walk along the stairs as turned (before they kept the straight path and walked through the steps). - With BeyondATC: the pushback tug is now left to BeyondATC too, like the jet bridges – ApronLife no longer sends its own tug to BeyondATC's aircraft. - Ready-made aircraft profiles: ApronLife now comes with tuned service positions for 12 common types (A320, A20N, A321, A21N, 737, B738, 777, B77L, A359, B788, B789, B78X) – stairs, catering, belt loaders, fuel, water and more line up better with the doors out of the box. Your own aircraft profiles are kept: whatever you adjusted stays yours, and the rest comes from the ready-made profile. Deleting a profile in the Studio brings back the ready-made one. FIXES - ApronLife could stop by itself after a few minutes at stands without a GSX passenger path when "Default jet bridge path" was turned off (1.5.4). - On the first start of the day the window could stay on the activation screen even though the license had already been confirmed – clicking Activate gave an error until ApronLife was reopened (1.5.5). - Remote stands: A320 and 737 family aircraft now always get the front and the rear stairs (each with its own bus), as intended – some AI models made ApronLife think they were smaller and they got only the front stairs. You can still choose one stair per aircraft type in the aircraft profile. - Passengers could stop at the bus door or at the foot of the stairs and stay there frozen until the end of the turnaround – two of them were waiting for each other. - Some AI models (AIG A320/A321/737, for example) report a much smaller wingspan than the real one: ApronLife now uses the real size of the type (also for AI E-Jets that only report "E195"), so vehicles and buses keep clear of the wings. - Starting at big airports with many heliports nearby (KLAX, for example): ApronLife could take a long time to start the ground services and, a couple of minutes later, restart them as if you had changed airport. It now goes straight to the airport you are at. - Aircraft profile (Studio): adjusting the front stairs also moved the rear stairs. Each stair now keeps its own adjustment – profiles you saved before stay exactly where you left them.
v1.5.4 ------ [EN] NEW - ApronLife passengers – NO GSX NEEDED (MSFS 2024 and MSFS 2020): ApronLife now has its own passengers. You no longer need GSX to see people walking to and from the aircraft through the jet bridges. Dozens of different people (ages, builds, outfits): texting with the phone in both hands, carrying briefcases and shopping bags, pulling rolling suitcases (lifted by the handle on the stairs) and wearing backpacks. They keep what they are doing on the stairs and queue without walking through each other. With GSX installed you choose in Settings → People → "Passengers": ApronLife, Mixed (ApronLife + GSX) or GSX – and they also use the GSX stairs and buses at remote stands. Coming soon: our own drivers and crew. The people package (about 1 GB) is downloaded by ApronLife once, in the background, the first time you open 1.5.4 with your PRO license – the log shows the progress, and if the download stops it continues from where it stopped. Until it finishes the passengers come from GSX. When it is ready ApronLife installs it in the Community folder; restart the simulator once. - Closed baggage carts (GSX): baggage trains now also use the GSX closed cart with side curtains – about half of the trains, and all of them in rain or snow. The curtain opens only on the cart the belt loader is working on, and closes again when he moves to the next one. In the Studio (airport or aircraft profile → Vehicles → "Baggage cart") you can fix open or closed carts instead of the automatic mix. - Ground crew waiting at the stand: when an arriving aircraft turns into its stand, two ground crew are already standing by in front of the stop line, next to the marshaller, and stay until the aircraft is parked and the turnaround crew takes over. Works with any traffic (BeyondATC, FSLTL, AIG, VATSIM). IMPROVEMENTS - Jet bridges carry the whole flight: the number of passengers now matches the aircraft (a 737 MAX 8 sends about 130–190 through the bridge, not a few dozen), and the aircraft you are watching up close always has a busy bridge. - Much fewer stutters when the airport fills up: vehicles and people now appear and disappear spread over time, instead of dozens in the same instant. In our test at a busy EGLL (same scene, measured against the previous behaviour several times): the 0.1% low FPS went up about 45% and the longest stutters became about 2.5 times shorter (worst frame ≈375 ms → ≈145 ms), with the same average FPS. - Container loaders, smooth now: the containers and the loader platform are updated 4 times more often (40 instead of 10 times per second) and glide like the rest of the vehicles, instead of moving in small steps. - ApronLife now remembers, for each airport, the stands where the simulator's jet bridge never works (the bridge cannot reach the door, or the simulator never lets the bridge dock there). On your next visits, aircraft at those stands get stairs right away instead of waiting for a bridge that will not come. Every 4th visit to an airport, ApronLife reads the airport again from the simulator (in case the scenery changed) and learns the bridges again – nothing to set up. - No connection to the ApronLife server: if a firewall, antivirus or the internet blocks ApronLife, a red notice now shows in the bottom bar (hover for what to allow; click to test again) and the log says so – before, the update check failed silently and new versions were never announced. The license screen messages also mention firewalls. ApronLife retries every 10 minutes. - Free trial: when the trial cannot start on this PC (virtual machine, PC without hardware identification, no connection), ApronLife tells the license server why – only the reason and the version, no e-mail – so these cases can be fixed. - New License tab: your PRO license and the real schedule package now have their own page. The Flights tab got a clearer schedule setup: two cards to pick the clock by your traffic (real time for BeyondATC, FSLTL and live traffic; simulator time for AIG and other custom schedules), and a compact AIG folder line. The Cinema mode button has a new look. - Phone and tablet: the ApronLife window opened from another device ("Access from the network") now fits small screens — the side menu becomes a row of icons under the title, the counters sit in two columns and the tables scroll sideways. - Jet bridges already docked by another program: if ApronLife detects that a jet bridge was already connected to an aircraft by another system, it no longer interferes with it and sends the passengers through that bridge. FIXES - MSFS 2024 with BeyondATC (simulator's own aircraft models): the aircraft type was not recognised, so a 787 or 777 could get the services of a narrowbody. The type is now read correctly in MSFS 2024 as well. - The belt loader and the container loader sometimes drove over the baggage tug and its carts. They now always arrive first; the baggage train comes after they are in place at the hold. - The rear belt loader sometimes arrived with the fuel truck already under the wing and slid sideways into its spot. Now, when refuelling is on the right wing, the fuel truck comes first: belt loaders, baggage trains and catering arrive after it has left, taking turns where they don't fit together. - At a stand whose jet bridge cannot reach the door, the next aircraft now gets stairs right away. The list of those stands was also carried over to the next airport in the same session (wrong stands) – it is now per airport. - Pushback tug leaving before the pushback: when an aircraft turned its beacon on long before pushing back, the tug left after 5 minutes and the aircraft pushed back on its own. The tug now waits up to 20 minutes. - In-sim panel: the stand now shows its full name, like the Flights tab (B35, D41), instead of only the number. - Flights tab: the note "≈ = estimated time; ~ = derived from the route" showed in Portuguese with the window in another language when there were no flights yet. - The ApronLife window kept opening as a browser tab instead of its own window after one slow start of Edge (for example while the simulator was loading). ApronLife now waits up to 30 s, only skips a browser after it fails twice in a row, and tries it again after 7 days. - VATSIM / IVAO (vPilot, xPilot, swift, Altitude running): an aircraft already parked when ApronLife starts is a pilot who connected at the gate and is about to leave – it now starts its turnaround at boarding and loading, instead of deboarding with the passenger count going up. An aircraft that taxis in after landing still gets the full turnaround, starting with deboarding. Online aircraft also no longer stand idle at the start waiting for their turn. - VATSIM / IVAO: the Real Schedule is no longer applied to online aircraft – they are flown by real pilots, with their own times, so their turnaround is no longer stretched or squeezed to match a real-world flight. - Flights tab and in-sim panel: during deboarding, the passenger percentage now counts down (passengers still on board), like boarding counts up. - ApronLife jet bridges: when the simulator could not load them (for example right after installing, before restarting MSFS), aircraft far from you got a jet bridge that docked and retracted in the same second. Now only aircraft within the jet bridge range get one. - ApronLife jet bridges: the messages shown when the bridges can't be used now say what to do (restart MSFS once, or reinstall ApronLife PRO with the latest installer). Running ApronLife PRO from the old folder of versions 1.5.0–1.5.1, which has no ApronLife bridges, is now reported in the log.
v1.5.1 ------ [EN] NEW - Settings → General: new "Access from other devices on my network (iPad, phone)", off by default. Open the ApronLife window on a tablet or phone on the same Wi-Fi: scan the QR code or type the address shown, then the access code (requested by a user). Windows may ask once to allow ApronLife on private networks. IMPROVEMENTS - No more donation buttons in PRO – only the Discord button (and a short thank-you in the "What's new" window). - Performance tab: the old "Forward belt loader" switch is gone. In PRO the front belt loader / container loader is chosen per aircraft type in the Profile Studio (aircraft profile → Belt loaders / container loaders: Automatic, Rear only, Front and rear), with its own tug and carts; Automatic = widebodies get both, other aircraft only the rear one. - The ApronLife window now remembers its size: resize it once and it opens with that size next time (requested by a user). FIXES - AIG aircraft are now recognized by their exact type (737-800, A330-200, 777-300ER, 737 MAX 8…): AIG names its models by variant, so they were read as "B737" or "A330" – the Profile Studio's "Adjust live in the simulator" said there was no model of that type at the airport, and AIG aircraft used the profile and door positions of the wrong variant. - Antivirus alerts when ApronLife goes to the background (reported with Kaspersky, "PDM:Trojan.Win32.Generic"): the tray icon and the folder and file pickers no longer start PowerShell with an encoded command, a pattern that some antivirus programs flag. Settings → General: new "Tray icon (next to the clock)", on by default – turn it off and ApronLife keeps running in the background without any tray icon (open the window again from the Start menu).
User Reviews
gubbaSMOKE
VerifiedNov 21, 2026
The ultimate app for maximum immersion! It brings the airport to life!
JonathanPeel
VerifiedNov 20, 2026
Firstly this is an excellent idea, and one of the BEST addons I have tried for Flight Simulator. Even the free version is great, and is wonderful to see to know if you will like it. This really makes the whole airport come to life, and seeing activity happening around other aircraft (not only yours). It is the next level of detail, and something you don't even realise has been missing until you see it. And finally, the community, developers, and support are all incredibly friendly and helpful. An excellent product, from start to finish.
Hi, and thanks for giving PRO a try! Sorry about the Discord link. Here’s a working one: https://discord.gg/dw3rzRc5xG. Our #support channel is the fastest way to get help. ApronLife PRO works a bit differently from what you described: it’s built to bring the apron to life on its own, following each aircraft’s real schedule. Every flight moves through parked, boarding, loading and pushback automatically at the right time, so there’s no need to set each one by hand. The Flights view is your departures board, showing where each flight is in that cycle. When you click a flight there, ApronLife places an amber arrow above that aircraft in the sim so you can find it on the apron. “Remove Arrow” simply hides it again. To get the most out of it (airport and aircraft profiles, the in-sim panel, the live adjustment, your own aircraft services and more), the manual walks through everything step by step: https://apronlifepro.com/manual If anything still doesn’t behave as expected, drop us a line in #support with your ICAO and a support package (Log tab → Create support package) and we’ll take a look. Enjoy your flights!
victormwape
VerifiedNov 17, 2026
What an amazing product. Brings so much life to my airports!
Thank you so much for your feedback Victor! I'm glad you are enjoying and having a good time with ApronLife!
Tonybeach76
VerifiedNov 16, 2026
Still some bugs but a true value added if you want to animate your airport
Thank you very much for your feedback! Feel free to join our discord and share your toughts and suggestions to make it even better! Thanks!
JohnFlook
VerifiedNov 15, 2026
Brilliant fun, gives you something to watch while the baggage loaders are busy! Combined with Beyond ATC and live traffic you see a live arrivals/departure board for the airport and can click on any entry to see that aircraft in a cinematic view. Some minor hit on frame rate but well worth the money.
Thank you very much John! I'm really glad to know about it! Your feedback is very meaningful, looking forward to developing more resources and new features, wish you the best, thanks!
RALFTRON
VerifiedNov 13, 2026
Amazing work from Nikitinha! Apron Life PRO is an amazing addon that gives life to the AI traffic and airports. And it got even better with the inclusion of apron services for our GA aircrafts. My PC is at a mid range and I run the game with most options on mid to low, but I still can use Apron Life with BATC and have fun seeing all the movement in the airports. Hope this app gets even better!
Thank you very very much RALFTRON, it's a pleasure to know about it! I'm really glad you enjoyed it! There will be much more improvements, keep an eye on it! Enjoy it!
kopinio21
VerifiedNov 13, 2026
It's an epic mod, it's special. For me, it's the thing that adds immersion to the whole sim. Excellent work, nothing more nothing less. Happy to pay for stuff like that for our hobby. Well done sir, well done!
It's really grateful to read your kind words! Thank you very much for your feedback and support! I hope you have the best and a lot of good time using ApronLife Pro! Thanks!
lmand
VerifiedNov 10, 2026
A truly fantastic and essential add-on for bringing airports to life and making them as realistic as possible. It's a real game-changer!
I'm very grateful for your feedback and comment! Thank you very much, I'm glad you enjoyed it! Thanks!
SHORTGIRAFF14
VerifiedNov 9, 2026
in MSFS2024 with GSX pro whenever i turn this on at full. massive performance drop at airport VRAM does not increase but the GPU utilization drops and resolves after taking off and performance and GPU utilization drop happens again after landing. and the vehicles clip through each other and drive through fences and outside airport permits.
Hello! Ok, answering all of your questions: 1- GSX for now is used for vehicles and drivers, if you don't have GSX you won't see some kind of vehicles and their drivers. The passengers are already from Apron Life Pro and all it's feature do not interfere or come from GSX. 2 - Once you start Apron Life and click to run the engine, you can minimize it to tray, whenever you takeoff it will pause the Apron Life engine and whenever you land it will automatically start the engine and serve your airport, but it needs to be opened, if you don't open Apron Life it won't do anything to your airport Thank you!
CaptBlu
VerifiedNov 8, 2026
I love how Apron Life PRO breathes life into MSFS 2024. Running it alongside GSX Pro is a massive upgrade, seeing realistic ground crews and baggage loaders servicing the surrounding AI traffic adds incredible realism. Best of all, it works flawlessly in the background without costing me any frames.
Thank you very much for your feedback! I'm really glad you are having fun with ApronLife Pro! Whenever you need feel free to reach us!
Nimic
VerifiedNov 8, 2026
I've encountered a recurring issue with ApronLife Pro at some airports where the application reports that it is unable to read the airport scenery, warning that ground vehicles may appear on taxiways. Whenever this warning occurs, ground vehicle behavior becomes highly erratic. Buses, passenger stairs, fuel trucks, and other ground service vehicles move randomly across the apron, taxiways, and other airport surfaces, seemingly without following any predefined routes or respecting the airport's ground layout. The vehicles appear to lack proper pathfinding and spatial awareness, resulting in unrealistic movements and vehicles wandering into areas where they should not be operating. Interestingly, I never experienced this behavior with the free version of ApronLife. My questions are: What specifically causes ApronLife Pro to fail to read certain airport sceneries? Is there a way to force scenery detection, manually configure airport layout data, or rebuild any relevant scenery cache? Can ground vehicle routing be restricted to valid apron areas when scenery detection fails, rather than allowing vehicles to roam across taxiways? Are there any settings or workarounds that could mitigate this behavior? This issue significantly affects usability and immersion, making ApronLife Pro practically unusable under certain circumstances, particularly when ground vehicles start moving unpredictably across active taxiways. I'd appreciate any technical explanation of the underlying cause and any possible workaround or permanent fix.
Hello Nimic, thank you for your feedback. I'm sorry that you had this experience, this is not what we expect to our users. I don't know if you asked for support but we have always solved and helped our users issues.. Some airports might have lack of routes informations than others and the Pro version has way more resources and variety, but this souldn't be a problem in any way. We would kindly ask you to join our discord community or send us via email a support package from the airports you had this problems, we actually encourage this for our users so we can make improvements and get a better ApronLife. Once again, thank you for the feedback, please feel free to send us the support package, we'll solve it if it's on your side or fix permanently of it's on our side, maybe if you get a newer and better experience after this we hope you have a new vision from ApronLife Pro, thank you!
va3fyc
VerifiedNov 7, 2026
Great product, fast updates, great support!
I'm really glad you enjoyed! Thanks a lot for the feedback! There is much more to come!
bgyuk
VerifiedNov 7, 2026
Great Product.
Thank you for your feedback, I'm glad you enjoyed it!
King_AsLan
VerifiedNov 5, 2026
Apron Life PRO delivers an excellent experience for aviation enthusiasts who enjoy realism, organization, and immersion. I appreciate the attention to detail, professional presentation, and dedication to making the overall experience enjoyable and engaging. The application is a great addition to the flight simulation experience, providing another level of excitement and motivation. Thank you to the developers for their hard work, commitment, and continued dedication to the aviation simulation community. My Rating: 5 out of 5 Stars! Highly Recommended! Keep up the excellent work!
That's an amazing comment! Thank you very very much for the review and feedback! I'm really glad you enjoyed ApronLife Pro! It's a pleasure to read and know it! Thanks for the support, there is much more to come! ♥
bluebee
VerifiedNov 5, 2026
This is amazing, it just brings every airport alive! I first tried the free version, which was already awesome. I felt that buying the main version was a good way to payback for all the hard work, and I love all the extra features it brings. Especially the integration with SimBrief and BeyondATC. Seeing the servicing vehicles and people around other aircraft is brilliant, and a bonus is that you also see vehicles driving around at every airport making it feel like something is going on. Passengers boarding, even crew walking to the aircraft. It's just brilliant!
I am flattered by your comment and review! Thank you so much for your kind words—I’m glad you enjoyed it! There is still much more to come, so enjoy and have fun! Thank you!
Falli911
VerifiedNov 4, 2026
I you have this you never want to go back :D There must be the question, why such functionality isn´t included in the base game... but, thanks to Nikitinha it works via app. Had the base version before and was astonished and overwhelmed. When I tried to support via coffee, I saw there´s a full version. Then it was a "no brainer" for me. Performance issues or loss you can see on big, busy and perhaps not very well optimized airports/hubs (Schipol, Frankfurt, Heathrow, JFK, Atlanta) which I mainly connect to. Therefore I use medium settings (in conncection to GSX Pro) in the vicinity up to 300-500m around my position. Everything else you wouldn´t see any way :D Besides that, it´s adding so much immersion, life and beauty into your sim - I missed my departure slot by 20mins yesterday, because I just observed airport life and made photos. So much for that :P
Amazing! I'm really glad and happy for your kind words! Thank you very much for your feedback and review! I hope you have lots of fun using ApronLife! Once again, thank you so much, wish you the best!
james35lg
VerifiedNov 3, 2026
Absolouty Brilliant. Happy Customer.
Thank you very much for your feedback James! I'm really glad you enjoyed!♥
tencatao
VerifiedOct 31, 2026
Excellent product!
Thank you very very much for your review and comment! I'm really glad you enjoyed!
grandfred29
VerifiedOct 31, 2026
What was missing from FlightSimulator! Really Essential Now
Thank you very much for taking some time for reviewing and commenting! I'm really glad you enjoyed!
skysmoker
VerifiedOct 26, 2026
It's really good, a few more updates in and it will be awesome. Thanks for your hard work.
Hello! Thank you very much for your comment and review! I'm glad you enjoyed it!
Chewie
VerifiedOct 25, 2026
The missing piece to make airports truly feel alive, great work! Now, and in the same way you added people for those of us who don't have GSX, I would love for you to add extra vehichles pack please to bring even more diversity to airports :-) UPDATE: I couldn't resist and got GSX Pro to work alongside ApronLife Pro and the result is amazing! Thanks again for this incredible app Sir :-)
Hi Chewie! Thank you very much for the review and comment! I'm really happy to read your kind words! I'm planning to add more soon! The passengers were the first step! Thanks!
bpendz
VerifiedOct 24, 2026
I run MSFS2024 on linux (i know i know), and this worked right out of the box on my proton prefix, i had to open up one port but this brought life to the apron and its EXACTLY what i was looking for (everything felt "dead" before, this for sure brings up the immersion. Really enjoying it so far and it has lots of customization. I would highly recomend this.
Wow this is a brand new experience! Even on linux haha! Thank you very much for your feedback, I'm really glad it worked for you on linux, thank you again and I wish you many happy flights!
rmecav
VerifiedOct 24, 2026
IT"S ALLLIIIIIVE!!! FINALLY...an active airport. Nothing broke immersion more, than stepping outside the cockpit view, and seeing a massive airport like KATL (thanks Matteo Veneziani) jammed with airplanes (thanks Say Intentions, FSLTL, and AIG) and the only sign of life, si the ground crew (thanks GSX Pro) prepping your plane for departure. Now, (thanks ApronLife Pro) airports look like they're supposed to look, like a hive of activity. Other planes with ground crews at work. Airport maintenance crews on the move in vehicles, apron attendants moving around the tarmac. ApronLife Pro (with the above mentioned add-ons) finally brings MSFS 2024's airports and environs to life, the way they are in the real world.
Amazing! Thank you very much for all the kind words! It's awesome all these feedback from you and the community! I'm really glad you enjoyed it and looking further for more improvements! Thank you!
CarstenFlip
VerifiedOct 24, 2026
Nice to see life in the airports. I don't have any fps-drop with this addon.....
Thank you very much for your review and comment! I'm really glad you enjoyed it!
rshaffer2211
VerifiedOct 23, 2026
Pretty good so far. 3 days and works well. No fps hit (yet…).
Hello! Thank you very much for your feedback! I hope it keeps like this! Thanks!
mickeyboeing898
VerifiedOct 23, 2026
great addon to my environment Thanks for this
Hello Mickey! Thank you very much for the feedback and review! I'm glad you enjoyed it! I hope you have a good time flying!
N55211
VerifiedOct 23, 2026
Absolutely love the addon. Really enhances the immersion and it works great. Would love it if there was a Tower view available as well. Not a must have though. Keep up the great work!
Thank you very much for the feedback and review! I'm really glad you enjoyed it! There are a lot more to come! Thanks!!
SkyMusafir11
VerifiedOct 22, 2026
This is defo a must have add on that makes MSFS a lot more realistic.. After tweaking the settings to my liking the performance impact is minimal.. Overall.. it's fantastic and highly recommended..
I'm really glad you enjoyed it! Thank you very much for the review and comment! I hope you have a good time using ApronLife PRO, more improvements are coming!
Profesor1099
VerifiedOct 22, 2026
I just start using it,but so far..it's great
Thank you very much for your review and comment! I hope you enjoy it! I invite you to give 5 stars if you do! ♥
LOSSLAV
VerifiedOct 21, 2026
great job dude you deserve my money, you change the whole prospective of flight simulator
I'm very grateful for your review and comment! I will keep the hard work to improve and maintain it's quality! thank you!
Justin1995
VerifiedOct 20, 2026
And it keeps improving!. What an outstanding app, I used the free version and was amazed with what the dev had done, what best way to support his work than to buy his payware version. I very much like your work, sincerely, you add things but always create a way for us to turn it OFF if we don't want a feature, congratz and I wish you the best with this app, you deserve it.
Thank you very very much for this kind review and comment! Always a pleasure to know that ApronLife is reaching a lot of people! I'm always trying my best to bring you awesome experiences!Thank you!
daavids19
VerifiedOct 20, 2026
Back in 2024, when we first dove into this game—which promised to immerse us in a world of new possibilities—who among us didn’t imagine that these kinds of features would eventually appear in the game? How wrong we were... but just when all seemed lost, there are always people who help us dream again. Thank you for this wonderful mod, which brings airports to life and keeps them in constant motion.
Thank you so much for such kind words! I'm pleased to know that ApronLife PRO brings joy and happiness to your simulations! Thank you for the review and comment!
AdamskiNZ
VerifiedOct 20, 2026
The freeware version of Apron Life got me hooked. If you combine it with GSX, (the freeware) "Vantage" or "Airside", you can enjoy amazing ground traffic. Sit back and watch the show! Refreshing to see frequent updates - and well worth the extra payware features, IMHO.
Thanks so so much for the review and comment Adamski! I'm glad you enjoyed and found a good combination between addons!
Dravman
VerifiedOct 19, 2026
This is a fantastic app ! A must to have ! Try it and you will love it as well , I bet !
Thank you very very much for the review Dravman! I'm really happy that you enjoyed it!
pointblank25
VerifiedOct 18, 2026
GSX was a breath of fresh air for populating your aircraft. It's amazing that this does exactly the same thing for the all AI aircraft populating your airport (depends on your settings, of course). It looks amazing and I found myself just spending time last night staring at all the night-time activity around KSFO. Tried the free version and it convinced me enough to pay for this Pro version which is surprising in it's options available. I'm confident that you can find a working setting for your computer and am sure you'll be pleasantly surprised by the result. Hope this gets supported over time as I believe it will be a must-have add-on once folks actually discover this. Amazing app and thanks for coming out with this. Congratulations from one happy customer.
It's amazing to read such a happy description like this! Thank you very much for your review and comment! I'm really really thankful and glad that you enjoyed the app! I'm going to keep the hard work for new resources and more improvements, thank you so much!
grond
VerifiedOct 18, 2026
Hi, enthusiast user of free version I have purchased the Pro. It looks really great, one of the greatest adds for MSFS! One wish: could be great to have a full airport timeboard for departures and arrivals (like it was the unfortunately discontinued tool for FSX and P3D SuperTrafficBoard).
Hello! Thank you for the review and comment! I hope you really enjoy everything on the app! Aboute the full airport timeboard, there is the in game menu, but I think I got what you mean and it's already on my futures notes for new features! Thanks !
fringall
VerifiedOct 17, 2026
Love this app! It finally brings FS2024 airports to life. I was though initially confused by the pricing for UK £ as the discount did not add up. However, on contacting the developer, he sent a really quick reply which helped to clarify: " the full price is 19,90 usd then 25% is about 14,9 usd! in £ it's a smaller value due to exchange rate but it's correct! "
Thank you so much for the review and comment! Feel free to reach out any time for support or suggestion! I hope you have lots of fun using it!
PeteFuss
VerifiedOct 17, 2026
This morning I bought the Pro version after using the standard version for the past few days and being very satisfied with it. I installed it, launched it, and there was quite a bit of activity at the airport. Since all the controls were set to “on,” though, it was pretty choppy. After making a few adjustments to the settings, my simulator is running smoothly again, and I’ve customized the airport experience to suit me and my hardware. I think it’s a great program—I wouldn’t want to be without it now. best regards, Peter
Hello Peter! Thank you very very much for your review and comment! I'm really pleased to know that you found good settings and are enjoying the app! Thank you!
Apron Life PRO
ApronLife PRO is a standalone utility for Microsoft Flight Simulator that manages realistic ground services and schedules around AI traffic at over 1500 airports. It synchronizes AI aircraft turnaround to real-world flight times using weekly updated ADS-B data, integrates with popular traffic injectors, and offers an in-sim departures board panel. Features include advanced jet bridge management, customizable airport and aircraft profiles, SimBrief integration, and multi-language support. GSX Pro is optional for further enhanced ground operations realism.
Black Week· ends in 8 days
Instant digital delivery • Secure payment
30-Day Best Price:€ 16,68
Requirements
Additional Requirements
Required
- Microsoft Flight Simulator 2024 or Microsoft Flight Simulator 2020
- Windows 10 or 11 (64-bit)
- An AI traffic program that parks airliners at gates: Beyond ATC, AIG Traffic Controller, SayIntentions, VATSIM traffic (vPilot) or similar. ApronLife does not create traffic, it serves the AI aircraft that are already parked.
- FSLTL or AIG aircraft models for the AI traffic
- Internet connection for the license activation and the weekly Real Schedule updates (works offline for up to 3 days after the last license check)
- A web browser for the settings window (Edge, Chrome, Brave, Vivaldi or your default browser)
Recommended (optional)
- GSX Pro (FSDreamTeam): adds stairs and buses at remote stands, passengers, ground crew, marshallers, baggage carts, container loaders, hydrant dispensers and your GSX liveries. Without GSX, ApronLife uses the simulator’s own vehicles.
- SimBrief account (for the flight plan integration)
Notes
- MSFS 2020: lavatory and water trucks don’t exist there, and the ApronLife jet bridges are a first version, still in testing.
- The Real Schedule needs traffic with real-world callsigns (for example, BeyondATC, or AIG with its flight plans). Aircraft without a matching flight keep the normal random turnaround.
Details
- Category
- Utilities
- Release Date
- Oct 14, 2026
- Last Updated
- Nov 14, 2026
- Reviews
- 38
- Compatibility
- MSFS2020/24