Installation:
Put "A32NX Logitech Panels (current version) by Pollot.xml" into your SPAD.neXt profiles folder.
[Default location: C:\Users\[your name]\Documents\SPAD.neXt\profiles]
Button Configurations:
Autopilot Panel:
- Left Selection Dial, all work as indicated CRS is unbound (probably should bind to baro)
- HDG - short push = knob push, long push = knob pull
- NAV- FPA/VS toggle
- APR - short push approach mode, long push loc
- REV - toggle 100/1000 selection
- ALT - short push = knob push, long push = knob pull
- VS - short push = knob push, long push = knob pull
- IAS - short push = knob push, long push = knob pull
- LEFT KNOB, adjust settings
- Autopilot Button, short push AP_MASTER (see fenix doc) long push All Cabin Calls
- Flap Lever - short push EFIS zoom, long push EFIS Mode
Switches:
- 1 - battery 1 and 2, external power
- 2 - On: Strobe Auto, Nav Logo Lights, IR align, arm emergency lights, no smoking, APU Start, APU Bleed, Fuel Pumps (these all are on timed delays to account for startups. Off: shut down apu, turn off apu bleed. (turn on to start APU and preflight, turn off to shutdown apu)
- 3 - Lights on, Lights Off/auto
- 4 - On: Engine Start Sequence, auto brake max, xpdr auto and tcas on, cstr on efis Off: Ignition off (turn on to start engs, turn off when started.)
- 5 - taxi lights
- 6 - landing lights
- 7 - seatbelts
flaps, throttles, spoilers, gear all mapped in msfs
Startup from cold and dark. Make sure all switches are off (if not, close spad.next, turn them off and reopen)
turn switch 1 on, turn switch 2 on, turn switch 3 on; wait for apu, turn switch 4 to start the engines, then turn switch 4 and 2 off once engines are started.
I'm definitely not a professional pilot, so if things are terribly out of order here please let me know.
Did a job on top of my preset (Max_Arrais)...
No problem. Good luck with future implementations!
2 years ago
CMTE_CAVOK